Upgrade Security:Fire Pump Excellence

Flow:13-1300 GPM
Pressure:2-20 BAR (30-290 PSI)
Jockey pumps are essential devices used to maintain stable pressure within systems, commonly applied in fire protection, water supply, and industrial processes. They automatically adjust pressure as demand changes, ensuring efficient system operation.

Flow：250-10000 GPM
Head： 3-16 Bar
The split-case structure allows for easy maintenance, and its wide pump range ensures compatibility with different operating conditions. The OTS pump finds application in water supply, cooling systems, industrial processes, and fire protection systems, providing reliable performance for handling different liquid media.

ISW series horizontal centrifugal pump is a new generation of energy saving,environment friendly verticalcentrifugal pump researched and developed by our company,whichabsorbs advanced technology of similar products abroad and adoptsdomestic general performance parameters of centrifugal pumps.

Pump flow:200≤Q≤5000GPM
Head:70＜H≤150m
Speed:1500-3550 rpm
Frequency50 Hz or 60 Hz
Those pictures display OTS series electric motor pump. OTS double suction split-case centrifugal pump has a wide range of performance, with the ability for a variety of uses.

Proper maintenance of an electric fire pump is essential to ensure its reliable performance during emergencies. Regular maintenance helps identify and address potential issues before they escalate into major problems. Here are some general steps to maintain an electric fire pump:

The horizontal fire pump has a single-suction multi-stage and segmented structure. Among the newly developed series of energy-saving products, its performance parameters including its technical indicators all meet the relevant international standards, so it has the largest The characteristic is that it is very efficient, and the noise is very low during operation. In addition, its corrosion resistance is also very good. In addition, its structure is very reasonable, so its service life is very long.

The long-shaft submerged pump is suitable for conveying belt particles, high viscosity, strong acid, alkali, salt, strong oxidant and other corrosive media. The new submerged pump is suitable for conveying various light media such as flammable and explosive. The shell, outlet pipe and overflow parts of the traditional submersible pump are all made of corrosion-resistant materials. The motor part is placed on the liquid surface, and the pump part is placed under the liquid surface. It has strong corrosion resistance, no blockage and high temperature resistance. Features. The pump body, motor and overcurrent parts of the new type of submersible pump are all made of special materials. The motor part and the pump part are coaxially connected and placed under the liquid surface. Features.

The horizontal pipeline pump is a horizontally arranged pumping device used for conveying liquids or gases. It consists of an electric motor, pump body, impeller, and sealing device. Compared to vertical pipeline pumps, the horizontal pipeline pump offers advantages such as a smaller space requirement, convenient maintenance, stable operation, and wide applicability. Its horizontal layout helps reduce axial and radial loads, thereby enhancing the pump’s stability and operational efficiency. The horizontal pipeline pump is suitable for conveying various liquids or gases and can be selected based on specific process requirements and medium characteristics. It is recommended to consult with professional engineers or pump suppliers when purchasing and using a horizontal pipeline pump to ensure the selection of suitable equipment.

The XA single-stage centrifugal pump is a widely used industrial pump designed for fluid transportation and handling in various industries. It features a simple and compact design with a rotating impeller and a stationary pump casing. The pump offers high efficiency, reliability, and flexibility in installation. It finds applications in water treatment, agriculture, construction, petrochemicals, energy, pharmaceuticals, and food processing. The XA pump is capable of handling different fluid mediums and provides efficient flow control. Its operating principle utilizes centrifugal force to draw in and propel fluids through the pump. Overall, the XA single-stage centrifugal pump is a reliable and efficient solution for fluid pumping needs in industrial settings.

Flow：250-10000 GPM
Head： 3-16 Bar
The split-case structure allows for easy maintenance, and its wide pump range ensures compatibility with different operating conditions. The OTS pump finds application in water supply, cooling systems, industrial processes, and fire protection systems, providing reliable performance for handling different liquid media.

-UL Standard:
Flow：100-3000 GPM   
Head： 90-250 PSI 
– NON-UL Standard:
 Flow：100-10000GPM   
Head： 40-250 PSI 

Electric fire pumps are used in diverse settings, including but not limited to commercial properties, industrial plants, warehouses, residential buildings, educational institutions, healthcare facilities, and public infrastructure like airports and stadiums.

Flow：50-7500 GPM
Head：3-20 Bar 40-300 psi
Power：11-1000 kw
Caliber：50-200 mm
Frequency：50 or 60 Hz

The OTS Double-suction Split-case centrifugal pump is a widely used centrifugal pump in industrial and water supply systems. It features a double-suction design with two suction inlets on either side of the pump. This pump offers high efficiency, stability, and reliability due to its rational design and advanced fluid dynamics principles. It can handle large flow rates and high heads, making it suitable for various applications. The split-case structure allows for easy maintenance, and its wide pump range ensures compatibility with different operating conditions. The OTS pump finds application in water supply, cooling systems, industrial processes, and fire protection systems, providing reliable performance for handling different liquid media.

The advantages of vertical pipeline centrifugal pump:

(1) Small size and small footprint.

(2) The structure is simple, the parts are few, and the maintenance is easy.

(3) The flow and pressure are stable, and the vibration of the pump is small when the pump is running normally.

The biggest characteristic of deep well pump motor and pump into an organic whole, it is immersed in the underground Wells to a kind of pump and water pump, is widely used in farmland irrigation and drainage, industrial and mining enterprises, urban water supply and drainage and sewage treatment, etc. Because the motor into the water at the same time, the reason for the structure of the motor requirements than the general motor special. The structure of the motor can be divided into dry type, half dry type, oil filled type, wet 4 kinds

The key components include the electric motor, pump assembly (which includes the impeller and casing), controller or control panel, suction and discharge piping, and any necessary valves and fittings.

Cavitation: Caused by low suction pressure, leading to vapor bubble formation and potential damage.
Wear and Tear: On impellers, bearings, and seals due to prolonged use.
Vibration: Often due to misalignment or imbalance.
Overheating: Usually a result of poor lubrication or mechanical binding.

The hot water pump is also a hot water pump product optimized on the basis of the ISG and ISW centrifugal pump series, especially the IRG hot water circulating pump has the largest consumption, because the pump adopts the vertical installation of the motor on the upper part, and the connection between the pump and the motor. There is also a short bracket in between, which will not cause the water in the motor to burn out the motor due to the leakage of the mechanical seal, and it can also be designed as a mechanical seal on the basis of the IRG hot water pump. The maximum temperature of high temperature pump products can reach 240 ¡ã C.

Flow：50-7500 GPM
Head：3-20 Bar
The long shaft pump is a high-performance engineering pump known for its unique long shaft design and exceptional capabilities. It offers advantages such as suitability for deep-buried pump stations, improved transmission efficiency, and reduced energy consumption. With excellent corrosion resistance and reliability, it can handle various fluids in diverse environments. It is a reliable solution for water supply, sewage treatment, and chemical processes.

NL Slurry Sewage Pumps are indispensable in wastewater treatment plants, mining operations, construction sites, and industrial facilities for pumping sludge, sewage, and slurries with high solids content, offering durable and efficient solutions for demanding pumping environments.

ISG series vertical single-stage single-suction centrifugal pump
is a new generation of energy saving, environment friendly vertical
centrifugal pump researched and developed by our company, which
absorbs advanced technology of similar products abroad and adopts
domestic general performance parameters of centrifugal pumps. In
addition, according to different operation temperatures and mediums,
we developed the hot-water pump(IRG), corrosion-resistant chemical
pump(IHG) and oil pump (YG) – . This pump enjoys excellent perfor
mance, good reliability, long operation life, reasonable construction
and nice appearance, which is outstanding in the industry.

ISO end-suction pumps offer high efficiency, high flow capacities, and the ability to withstand high pressures. The suction inlet is designed to efficiently intake fluids, while the pump itself is constructed to be compact, making it suitable for installation and maintenance in limited spaces.They also provide multiple material options to accommodate different fluid mediums, including corrosive and high-temperature substances. ISO end-suction pumps find wide application in industries such as chemical, petroleum, pharmaceutical, food and beverage, and water treatment, where they are used for fluid transportation, circulation systems, heating, and cooling systems, among others. In conclusion, ISO end-suction pumps are reliable and efficient industrial pumps that meet global standards, making them suitable for various industries and applications.

Electric motor fire pumps are used in various water environments, not only to meet the general water supply but also to be a good helper for fire water. The electric motor fire pump is manufactured with good structure and workmanship. It has a wide range of performance, and is easy to use and operate for a long time. The motor fire pump is aimed at various fire water environments, so the selection should also be based on the actual demand environment, performance parameters, etc.

Self-priming pump is a kind of self-priming centrifugal pump, which has the advantages of convenient operation, stable operation, easy maintenance, compact structure, long service life, high efficiency and strong self-priming ability. It does not need to install a bottom valve in the pipeline, as long as there is a quantitative suction liquid stored in the pump body before working, and different liquids can use self-priming pumps of different materials.

·UL Standard
Flow：100-2500 GPM
Head：90-250 PSI
·NON-UL Standard
Flow：250-10000 GPM
Head：30-200 m / 3-20 Bar / 40-290 psi

Flow:25≤Q≤5000GPM
Head:50＜H≤300m
Speed:1500-3550 rpm
Frequency:50 Hz or 60 Hz

Vertical turbine pump is a kind of centrifugal pump. From the perspective of centrifugal pump, it is improved from the performance of submerged pump. This pump can be used to transport rainwater, iron oxide water, sewage, corrosive industrial Wastewater, seawater and other liquids. Widely used in water companies, sewage treatment plants, steel plants, mines and other industrial and mining enterprises, as well as municipal water supply and drainage, farmland irrigation, flood control and drainage projects.

XA series single-stage centrifugal pump is the earliest single-stage single-suction centrifugal pump product launched by Better (China) Technology Co., Ltd.
This product combines the advantages of similar products in China and abroad, and is designed with excellent hydraulic model.Therefore, its excellent hydraulic performance and structural characteristics ensure that users can effectively reduce the operation cost of pumps in various applications.

ISO end-suction pumps offer high efficiency, high flow capacities, and the ability to withstand high pressures. The suction inlet is designed to efficiently intake fluids, while the pump itself is constructed to be compact, making it suitable for installation and maintenance in limited spaces.They also provide multiple material options to accommodate different fluid mediums, including corrosive and high-temperature substances. ISO end-suction pumps find wide application in industries such as chemical, petroleum, pharmaceutical, food and beverage, and water treatment, where they are used for fluid transportation, circulation systems, heating, and cooling systems, among others. In conclusion, ISO end-suction pumps are reliable and efficient industrial pumps that meet global standards, making them suitable for various industries and applications.