Versatile 300kw Diesel Engine Split Case Fire Pump

When the diesel engine fire pump unit receives an effective fire signal, if the power supply system of the diesel engine fire pump is powered off, loses phase or the electric pump cannot start normally, the diesel engine fire pump unit will automatically start to run. Once the power supply system returns to normal or the electric pump can operate normally, it can automatically switch to the electric pump.

Flow：80-2700 GPM
Head：10-24 Bar 145-350 psi
Power：11-1000 kw
Caliber：65-300 mm
Frequency：50 or 60 Hz
Working Pressure：≤2.5 MPa

A fire pump system typically includes the pump itself, a driver (usually an electric motor or diesel engine), a controller, and various accessories like suction and discharge piping, check valves, and pressure gauges.

The diesel engine fire pump has automatic, manual and fault self-checking functions. It can monitor the working state of the whole process, restore the function of failure start, automatic pre-lubrication and automatic restart of preheating, so that the equipment start-up is safer and more reliable. It has the functions of central control room remote control, remote control and field bus connection. The battery is fully automatic floating charge (constant current, constant voltage, trickle charge) mode to ensure that the battery is in a standby state at any time. Diesel engine fire pump is easy to use, equipped with remote instrument and instrument, which can be connected to the control center as needed, easy to install and use, and easy to maintain.

The biggest difference between a diesel engine fire pump and an electric water pump is that it has its own independent power supply system—the battery. Therefore, the start-up and operation of the diesel engine fire pump can be completely separated from the mains.

The diesel engine fire pump is usually used as a backup facility, and it will only start automatically when the electric water pump fails or the power is cut off when the fire signal comes. When equipped with an ultra-low pressure pump starting device, the matching electric pump control cabinet should also be equipped with an ultra-low pressure pump starting device, and the lower limit of pump starting should have a certain pressure difference. Of course, it is also possible to design a control system that is more suitable for customer needs according to customer requirements.

·UL Standard:
Flow：50-2000 GPM   
Head： 80-250 PSI 
·NON-UL  Standard:
Flow：50-5000GPM 
Head： 40-250 PSI 

The XBC-IS diesel engine fire pump with wheels excels in terms of mobility, which is a significant advantage. It is equipped with sturdy and durable wheels, allowing you to effortlessly move the fire pump to the desired location. Whether in urban or rural areas, it can adapt to various terrains and environmental conditions. This convenient mobility makes the XBC-IS diesel engine fire pump with wheels an ideal emergency firefighting equipment.

Diesel engine fire pumps are selected according to different working conditions: single-stage single-suction centrifugal pump, high-pressure multi-stage pump, double-suction split case pump, etc.

Flow：80-4000 GPM
Head：3-15 Bar
Power：11-1000 kw
The Diesel Single-stage Single-suction Fire Pump is a versatile solution suitable for a wide range of applications. From hotels, hospitals, and sports arenas to chemical plants, refineries, metallurgical facilities, energy plants, and pharmaceutical companies, this pump set ensures reliable fire protection. It is also ideal for shopping malls, commercial complexes, office buildings, and high-end residential towers. Whatever the setting, the Diesel Single-stage Single-suction Fire Pump delivers dependable performance to safeguard lives and properties from fire risks.

Diesel engine fire pumps are often used for emergency water supply in high-rise buildings, water companies, steel plants, wineries, chemical plants, hotels, hospitals, and other large-scale projects. Diesel engine fire pump is suitable for unattended emergency water supply system. The product has the characteristics of advanced technology, high degree of automation, superior performance, complete protection functions, reasonable structure, simple installation, and high cost performance. net pressure. Diesel engine fire pumps are selected according to different working conditions: single-stage single-suction centrifugal pumps, high-pressure multi-stage pumps, double-suction split pumps, etc.

The self-priming pump is a kind of water pump. The difference from other pumps is that it can separate water and gas by itself, form a negative pressure inside, and fill the diversion water. Before the new pump is used, a little water should be poured into the pump body, which is conducive to the rapid separation of steam and water. In addition, the installation position should be careful not to exceed its suction stroke.

Diesel engine fire pump
Power: 22kw
Capacity: 10L/S
Head: 8bars

It shows the testing of diesel engine multistage pump for firefighting. D series single-suction multistage centrifugal pumps are widely used in high-rise buildings, fire protection, boiler feed water, high-pressure cold and hot water circulation of cooling water systems, parallel booster pump water supply systems and various irrigation fluid transportation.

The XBC-IS Diesel Fire Pump Set is a versatile solution suitable for a wide range of applications. From hotels, hospitals, and sports arenas to chemical plants, refineries, metallurgical facilities, energy plants, and pharmaceutical companies, this pump set ensures reliable fire protection. It is also ideal for shopping malls, commercial complexes, office buildings, and high-end residential towers. Whatever the setting, the XBC-IS Diesel Fire Pump Set delivers dependable performance to safeguard lives and properties from fire risks.

1. When a fire occurs, the power supply fails and the electric fire pump unit cannot be put into use normally, the diesel engine fire pump unit can be automatically put into operation to ensure the normal firefighting.
2. There is no need for long-term investment in power resources, saving commercial power supply transformers and normal expenses.

The diesel engine fire pump set is equipped with various automatic functions to meet the requirements of national standards and ensure the equipment is in a normal standby state for a long time, and can be put into fire fighting work at any time.

The XBC-ZWC Diesel Engine Self-priming Pump is a powerful and versatile solution for various water transfer applications. Designed with reliability and efficiency in mind, this self-priming pump is specifically engineered to handle water transfer tasks with ease. Whether you need to move water from one location to another, drain flooded areas, or supply water for irrigation, the XBC-ZWC Diesel Engine Self-priming Pump is your trusted companion.

Diesel end suction pumps can be used in large public places such as chemical plants, high-rise buildings, fire departments, ships and ports.

Flow：50-7500 GPM
Head：3-20 Bar
Power：11-1000 kw
The XBC-JC Diesel Engine Vertical Turbine Fire Pump is a reliable and efficient hydraulic solution designed for extracting water from deep wells and hot springs. With its unique long shaft design and advanced technology, this pump delivers powerful pumping capacity and lift height, swiftly transporting large volumes of water to desired locations.

The XBC 11.5-160-S Diesel Engine Fire Pump is an essential equipment in firefighting systems, designed to meet emergency firefighting needs. Whether during power outages or in the absence of electricity supply, it provides reliable water supply and increases firefighting water pressure to ensure smooth firefighting operations. The XBC 11.5-160-S Diesel Engine Fire Pump finds wide application in various locations and buildings, including factories, commercial buildings, residential complexes, hospitals, airports, ports, and more. Whether serving as the primary firefighting water source or a backup water supply, it offers reliable support to your firefighting equipment and systems.

Diesel engine fire pumps can choose ductile iron and 304 stainless steel materials, which can meet various special use conditions and technical requirements of users, and diesel engine fire pumps can be matched with different brands of diesel engines to ensure stable performance and long service life of diesel engine fire pumps Long, high degree of automation.

Flow：80-4000 GPM
Head：3-15 Bar
Power：11-1000 kw
The XBC-IS Diesel Fire Pump Set is a versatile solution suitable for a wide range of applications. From hotels, hospitals, and sports arenas to chemical plants, refineries, metallurgical facilities, energy plants, and pharmaceutical companies, this pump set ensures reliable fire protection. It is also ideal for shopping malls, commercial complexes, office buildings, and high-end residential towers. Whatever the setting, the XBC-IS Diesel Fire Pump Set delivers dependable performance to safeguard lives and properties from fire risks.

This series of pump is horizontal multistage single suction centrifugal water pump. This pump is efficient , reliable, and durable with low noise performance, easy maintenance and wide scope of usages.

Diesel fire pump has the characteristics of good start-up, strong overload capacity, compact structure, convenient maintenance, simple use, high degree of automation, and is a reliable fire equipment.

Flow：50-5000 GPM
Head：3-16 Bar
Power：11-1000 kw
Frequency：50 or 60 Hz
The XBC-ISO pump set is suitable for emergency firefighting scenarios, particularly ideal for high-rise water supply, building firefighting, central air conditioning water circulation, industrial process system circulation, cooling systems, boiler water supply, industrial water supply and drainage, water plant supply, irrigation in plantations, and more. This firefighting pump set is equipped for emergency rescues and can operate efficiently even during power outages. Moreover, its end-suction design simplifies operation and saves installation time.

Routine maintenance includes checking for any signs of damage, testing the pump, driver, and controller, inspecting and cleaning the suction and discharge pipes, and ensuring the proper operation of auxiliary equipment like jockey pumps.

The XBC-S 11.5/160 320kW Diesel Engine Fire Pump is a cutting-edge and high-performance firefighting solution designed to provide exceptional power, efficiency, and reliability in fire suppression operations. This robust fire pump is specifically engineered to meet the demands of challenging fire scenarios, ensuring the swift and effective extinguishing of fires in various industrial, commercial, and residential settings.

Flow：80-2700 GPM
Head：10-24 Bar
XBC-D Diesel Fire Pump Set is a versatile and reliable firefighting solution designed for a wide range of applications. Whether it’s industrial facilities, commercial buildings, residential complexes, or public infrastructure, the XBC-D Diesel Fire Pump Set ensures effective fire protection. With its robust design and advanced features, this pump set is ready to tackle emergencies and safeguard lives and properties in various firefighting scenarios.

For large fire pumps, diesel fire pumps are presently the hottest fire pumps on the request, especially large storages, jetties, airfields, petrochemicals, power shops, and thawed gas stations, which frequently bear similar large inflow and high power fire pumps. still, unlike the current domestic request, there aren’t numerous professional manufacturers of diesel engine fire pumps, and the models aren’t colorful. As far as XBC- IS diesel engine fire pumps are concerned, it has its own characteristics.

Standard:
       UL    Flow：100-3000 GPM    Head： 90-250 PSI 
       NON-UL   Flow：100-10000GPM   Head： 40-250 PSI 

Diesel engine fire pumps are used for fire-fighting water supply in large-flow, high-lift occasions, and the diesel engine has good starting characteristics, fast starting speed, strong overload capacity, energy saving and does not need to be on standby all the time. The fire pump has complete performance and wide spectrum range. Single-stage single-suction pumps, multi-stage single-suction pumps, self-priming pumps and long-axis pumps can also be used in parallel and combined, with wide flow and pressure ranges. Fire pumps are widely used for fire water supply in warehouses, docks, airports, petrochemical, power plants and other industrial and mining enterprises.