What are the characteristics of single-stage double-suction fire pump set?

The electrical control cabinet of the fire pump set has the switching control mode of single pump, multiple pumps, and multiple main and standby pumps. According to the power of the pump and user requirements, the starting mode of the pump motor can be configured as direct start, star-delta start and other forms.

The vertical turbine fire pump is circulating water pump, and its over-flow medium is sea water. The function is to provide flushing water for the drum-type rotating filter to ensure that impurities and sea creatures can be washed away in time, thus bring clean seawater downstream. It can use with electric motor and also diesel engine.

The sewage pump is a kind of centrifugal impurity and has many forms: such as submersible type and dry type. At present, the most common submersible type is the WQ type submersible sewage pump, and the most common dry type sewage pump is the W type horizontal sewage pump. And two types of WL vertical sewage pump. Mainly used to transport urban sewage, manure or liquid containing fiber. For the medium of solid particles such as paper scraps, the temperature of the conveyed medium is usually not greater than 80¡ãC.

This kind of controller was fit for high-voltage motor，which is the voltage of motor is 6000V or 10KV.

including high-voltage switch cabinet, High-pressure solid-state soft starter device,High-voltage reactive power centralized compensation device,direct current cabinet, onsite cabinet, intellengint inspection cabinet, High-voltage patrol inspection contact cabinet, Emergency starting cabinet for high-voltage machinery

The equipment through the back curved impeller will be liquid forward at the same time, the sludge in the oxidation tank to fully stir and mix, to improve the oxidation tank and other sewage treatment facilities water flow conditions, so that different water to obtain the sewage treatment process required by the flow rate, in order to prevent sludge settlement, improve the efficiency of sewage treatment.

The double-blade impeller structure is adopted, which greatly improves the passing capacity of dirt.
The mechanical seal adopts a new type of grinding pair, and runs in the oil chamber for a long time;
The overall structure is compact, the volume is small, the noise is low, the energy saving effect is remarkable, the maintenance is convenient, and the user is convenient to replace;
Can be used within the design range without overloading the motor;

It suitable for factory business seriously polluted wastewater emissions, residential sewage PaiWuZhan, urban sewage treatment plant drainage systems, air-defense drainage station, waterworks water supply equipment, hospital, hotel of sewage, municipal engineering, construction, mining machine, rural biogas digester, irrigation and other industries, sewage containing particles, dirt, Can also be used for clean water and with weak corrosive media.

Quzhou Better Explosion Proof Motor CO.,LTD (Better Ex-proof)is the only onemanufacturer with explosion-proof motors national production license,explosionproof certificate in the West Region of Zhejiang.Created in 2004,mainly producesthree-phase asynchronous motors (Y,Y2,YX3,YE3),as well as special motorsYPT,flameproof three-phase asynchronous motor (YB,YB2,YB3,YBXn),alsoproduces submersible three-phase asynchronous motor YQ.Our company is nowdeveloping a dust explosion-proof three-phase asynchronous motors YFB and soon.Better Ex-proof also customize some non-standard motors for enterprises,forexample,long axis,polygon axis,and stainless steel shaft motors.The annuaoutput is r than 60000 sets.It is well sold around China and long exporteto Russia,alia,America,Canada,New Zealand,South Africa,Mideast.

Hollow shaft Motor for vertical turbine pump, which use for vertical turbine pump

The constant pressure variable frequency water supply equipment is an advanced system designed to maintain stable water pressure while ensuring energy-efficient water supply. It utilizes variable frequency technology and an intelligent control system to dynamically adjust pump speed and water pressure based on real-time water demand. This eliminates energy wastage caused by frequent start-stop cycles in traditional systems, providing users with a constant water pressure supply for stable and reliable water distribution during peak and off-peak periods. The equipment’s intelligent control system enables remote monitoring and automatic alarms, improving operational reliability and maintenance efficiency.

The Fire Pressure Stabilization Equipment, coupled with the CDL Vertical Multistage Fire Pump, offers a comprehensive solution to elevate fire safety measures. This powerful combination ensures a consistent water pressure for effective fire suppression. By incorporating pressure stabilization technology, this system guarantees an uninterrupted fire water supply, efficient water distribution, and reliable operation of fire hydrants and sprinkler systems. With advanced infrastructure and the ability to maximize firefighting capabilities, this configuration significantly enhances overall fire safety standards. Investing in fire pressure stabilization equipment is a proactive step towards ensuring superior fire protection and providing peace of mind in critical situations.

The fire pump refers to a clean water pump used for fire water supply, and a single pump that handles medium temperature below 80 degrees and is not corrosive. The pump set is the joint operation of multiple fire pumps to ensure the quantity and stability of the water supply. The electric motor fire pump group adopts multiple fire pumps powered by electric motors. The general fire water supply environment is equipped with one electric and one diesel fire pump as the reserve water pump to ensure sufficient emergency water consumption. The main components of the electric motor fire pump group are the motor and the pump body. The subdivision of the pump body is the pump casing, impeller, pump shaft, bearing, coupling, sealing form, water lift pipe, etc. The specific fire pump model is determined according to the environment and performance requirements, and at the same time According to the material quotation required by the customer, accurate selection is beneficial to on-site use and reduces failure problems.

XBD series fire pumps are mainly used for the fixed fire hydrant firesystem, automatic spraying fire system used by all sorts of organs, projects, high-floor buildings etc. and can be trans ferred with the clear water without solid grain under 100 – ℃ or its equivalence, also be used for public-used water providing system for fire, living, production, construction and municipality.

The double-blade impeller structure is adopted, which greatly improves the passing capacity of dirt.
The mechanical seal adopts a new type of grinding pair, and runs in the oil chamber for a long time;
The overall structure is compact, the volume is small, the noise is low, the energy saving effect is remarkable, the maintenance is convenient, and the user is convenient to replace;
Can be used within the design range without overloading the motor;

The ZWX box-type non-negative pressure water supply equipment is a pressurized water system designed to address inadequate municipal water pressure in critical settings such as hospitals and hotels, where water cannot be shut off. It also serves as an ideal solution for meeting the domestic water needs of high-rise buildings and, specifically, fulfilling the water requirements of schools. This equipment ensures a continuous water supply, even during maintenance or emergency situations, effectively resolving the challenges posed by low water pressure. With its efficient pressurized water supply and advanced control technology, the ZWX equipment offers stable water pressure and flow rates, catering to the diverse demands of different settings. Furthermore, its intelligent operation and energy optimization contribute to reduced energy consumption.

Fire pump fuel tanks should be inspected and maintained regularly according to relevant regulations and manufacturer recommendations. Typically, this includes periodic checks for leaks, corrosion, proper fuel levels, and the condition of associated components such as vents, gauges, and fuel lines.

The pump is a single stage single suction vertical centrifugal pump, the main components are volute, impeller, pump seat, pump shell, support cylinder, motor seat, motor and other components. Volute, pump seat, motor seat, impeller nut is cast iron, corrosion resistance, corrosion resistance is good, convenient processing technology.

While the initial investment in firefighting pumps and fire protection infrastructure may represent a significant capital expenditure, the long-term benefits of enhanced fire safety, reduced property damage, and potential savings in insurance premiums outweigh the costs. Cost-benefit analyses and risk assessments help stakeholders make informed decisions about allocating resources to improve fire protection capabilities and mitigate financial risks associated with fire emergencies.

1. Industrial and urban water supply and drainage, high-rise building pressurized water supply, garden sprinkler irrigation, fire pressurization, long-distance transportation, HVAC refrigeration cycle, long-distance transportation, cooling tower water supply, garden sprinkler irrigation, refrigeration flushing, bathroom and other cold and warm water circulation increase Pressure and equipment matching
2. Food, pharmacy, brewing, metallurgy, chemical industry, textile, wood processing, papermaking, high temperature hot water pressurized circulation transportation of boilers in restaurants, bathrooms, hotels, etc. and urban housing heating circulation pumps
3. Petroleum, chemical, metallurgical, electric power, paper, food, pharmaceutical and synthetic fiber sectors
4. Petroleum products such as gasoline, kerosene, diesel
5. Power station water supply and drainage, farmland drainage and irrigation and various water conservancy projects.
6. Pump rooms for key projects, central air-conditioning and scientific research institutions, hospitals, etc.

XBD-S fire pump is a horizontal split structure type. The suction port and the discharge port are below the axis of the pump, and the horizontal direction is perpendicular to the axis. The pump of this structure type does not need to disassemble the inlet and outlet pipes during maintenance. Installation and maintenance is very convenient. The rotor as a whole
The combined parts can be hoisted as a whole for easy maintenance, and the same rotor part can be used for reverse rotation. The bearings at both ends are made of high-precision imported deep groove ball bearings, which have smooth operation, low noise and long service life.
Shaft seals are available in two types: mechanical seals or packing seals, and users can choose by themselves.

The box-type non-negative pressure water supply equipment can be directly linked to the water supply network to ensure that the water supply network does not generate negative pressure. The pressurized water in the closed tank at peak time can compensate for the shortage of water supply in the water supply network and meet the needs of users.

NL type sewage mud pump is used for the suction, delivery and sprinkling of river mud, feces and river water, and is suitable for municipal, infrastructure, chemical, printing and dyeing industries.
It can be used for municipal, infrastructure, chemical, printing and dyeing, medicine, shipbuilding, casting, food and other industries to suck thick liquid, muddy liquid, paste, quicksand and flowing sludge in urban rivers, and it can also be used for queuing up the fluid containing mud and small gravel in coal mines If combined with high pressure and hydraulic pine, the hydraulic machinery Earthwork unit can also be used for excavation and transportation of small water conservancy projects such as land leveling, dredging and digging of rivers and ponds, as well as air defense works and underground works in cities. Fish culture is used to clean ponds with water and increase oxygen in fish ponds.

Volume:500-2000L

This large, high-efficiency firefighting foam canister is designed for industrial and professional settings, offering exceptional fire extinguishing performance and reliable safety assurance. Whether in factories, warehouses, or other high-risk environments, it is the best choice for fire rescue operations.

The equipment from Better Technology Group is debugging now

Product Introduction of
ZX series self-suction pump is an energy saving pump designed with ISO international standard and developed through absorbing and improving the r elated technical data both at home and abroad and belongs to the self-suction centrifugal pump and uses the mechanical seal of a ceramic ring so as to resist any sandy liquid to go into the sealing face, preventing it from getting scratched. This pump holds the advantages of a compact structure, easy operation, stable movement, easy maintenance, high efficiency, long duration and strong self-suction capacity and, as no foot valve is needed to be mounted on the pipeline and only a certain amount of leading liquid is required to be filled into the pump before work, improves the work condition while simplifying the pipeline system.

The electric diaphragm pump is a reliable and efficient industrial pump powered by an electric motor. It uses diaphragms to move liquids, making it suitable for handling various fluids, including clear water, chemicals, corrosive liquids, viscous substances, and particle suspensions. With its compact size and lightweight design, the pump is easy to install and maintain. It finds extensive use in industries such as chemical, petroleum, food and beverage, paper-making, and environmental protection. The pump’s leak-free and eco-friendly operation ensures safe and sustainable fluid handling processes. Its versatility, efficiency, and reliability make it an ideal choice for fluid transportation in various industrial applications.

The fire control cabinet is mainly used to control the important executive device of the fire pump. The fire hydrant pump control cabinet and the fire sprinkler control cabinet are collectively called the fire control cabinet. When the fire hydrant pump (spray pump) control cabinet receives the fire hydrant signal, it will press Indicates to start or stop the fire water pump.

The horizontal mixed-flow pump is a kind of shell type single suction pump with one impeller. The reasonable structure makes for reliable operation, convenient maintenance, high efficiency, small volume and light weight.

Non-negative pressure frequency conversion water supply equipment is a new type of water supply equipment developed on the basis of frequency conversion constant pressure water supply equipment.