What are the start-up preparations for diesel engine fire pumps?

The single-suction pump sucks in horizontally and axially, and spit out radially upwards. The pump is a suspension structure, and the rotor parts can be withdrawn for maintenance without disassembling the inlet and outlet pipelines during maintenance. The pump is connected with the motor through a common elastic coupling or an extended elastic coupling, and the shaft seal of the pump is sealed with a soft packing. The bearing is a single row radial ball bearing, lubricated with lubricating oil. From the motor side, the pump rotates clockwise.

Equipment control function description
The equipment is designed to have one use and one standby function. The main pump runs
normally, and the standby pump starts automatically after the main pump fault .Control
cabinet with two start ways: remote start function and site start. (DC24V provided; Two
startup modes are available for users to select)
◆ Automatic start state
First, the switch to the “automatic” position, and then the remote startup instruction
sent. Upon receiving the startup instruction, it will immediately enter the running state, and
then the corresponding fire pump (jockey pump) indicator light on, the system will run the
main pump.Stop the running fire pump (jockey pump)remove the remote start instruction.
◆ Manual start state
First, put the switch to the “manual” position, press “fire pump start up” or “pressure
jockey pump start up” , then fire pump (jockey pump)operation indication lights on, then
enter the running state. When the fire pump (jockey pump) is running, press the “fire pump
stop or jockey pump stop button and the fire pump (jockey pump )stops running

Flow：50-5000 GPM
Head：3-16 Bar
The XA single-stage centrifugal pump is a widely used industrial pump designed for fluid transportation and handling in various industries. It features a simple and compact design with a rotating impeller and a stationary pump casing. The pump offers high efficiency, reliability, and flexibility in installation. It finds applications in water treatment, agriculture, construction, petrochemicals, energy, pharmaceuticals, and food processing.

The vertical turbine pump can match the electric motor or diesel engine according to the head and flow parameters of the user. The vertical turbine pump is mainly used in clear water medium or liquid with physical and chemical properties similar to water, with stable performance and high working efficiency. The material selection of Better Technology Group Co., Ltd. is reasonable, the quality is stable, and the price is affordable.

Smooth operation: The pump shaft and impeller are balanced to ensure smooth operation without vibration.
No water leakage: Carbide seals of different materials ensure no leakage when conveying different media.
Low noise: The water pump supported by two low-noise bearings runs smoothly, except for the faint sound of the motor, which is basically silent.
Low failure rate: The structure is simple and reasonable, and the key parts are equipped with international equipment, and the trouble-free working time of the whole machine is greatly improved.
Easy maintenance: replacement of seals and bearings is simple and convenient.
Less space occupation: The outlet can be left, right and upward, which is convenient for pipeline arrangement and installation and saves space.

The advantages of vertical pipeline centrifugal pump:

(1) Small size and small footprint.

(2) The structure is simple, the parts are few, and the maintenance is easy.

(3) The flow and pressure are stable, and the vibration of the pump is small when the pump is running normally.

Electric motor fire pumps are used in various water environments, not only to meet the general water supply but also to be a good helper for fire water. The electric motor fire pump is manufactured with good structure and workmanship. It has a wide range of performance, and is easy to use and operate for a long time. The motor fire pump is aimed at various fire water environments, so the selection should also be based on the actual demand environment, performance parameters, etc.

Flow：50-5000 GPM
Head：3-16 Bar
The XA series single-stage centrifugal pump is a widely used industrial pump designed for fluid transportation and handling in various industries. It features a simple and compact design with a rotating impeller and a stationary pump casing. The pump offers high efficiency, reliability, and flexibility in installation. It finds applications in water treatment, agriculture, construction, petrochemicals, energy, pharmaceuticals, and food processing.

The video shows the process of electric vertical turbine pump testing. Vertical turbine pump is better used for city, factory dirty water and water containing great sand in river and sea, widely used in factories and mines, city and countries, petrolatum filed, plant and irrigation on farmland.

Fire pumps are mainly used for pressurized water delivery in firefighting system pipelines, and can also be used in industrial and urban water supply and drainage, high-rise building depressurized water delivery, long-distance water delivery, heating, bathroom, boiler cold and warm water circulation pressurized air conditioning refrigeration system water delivery and equipment matching, etc.

The long shaft pump is a high-performance engineering pump known for its unique long shaft design and exceptional capabilities. It offers advantages such as suitability for deep-buried pump stations, improved transmission efficiency, and reduced energy consumption. With excellent corrosion resistance and reliability, it can handle various fluids in diverse environments. The long shaft pump provides flexibility through customization options and multiple driving choices. It is a reliable solution for water supply, sewage treatment, and chemical processes. Choose the long shaft pump for reliable and efficient fluid handling in your engineering projects.

The OTS Double-suction Split-case centrifugal pump is a widely used centrifugal pump in industrial and water supply systems. It features a double-suction design with two suction inlets on either side of the pump. This pump offers high efficiency, stability, and reliability due to its rational design and advanced fluid dynamics principles. It can handle large flow rates and high heads, making it suitable for various applications. The split-case structure allows for easy maintenance, and its wide pump range ensures compatibility with different operating conditions. The OTS pump finds application in water supply, cooling systems, industrial processes, and fire protection systems, providing reliable performance for handling different liquid media.

The fire pump refers to a clean water pump used for fire water supply, and a single pump that handles medium temperature below 80 degrees and is not corrosive. The pump set is the joint operation of multiple fire pumps to ensure the quantity and stability of the water supply. The electric motor fire pump group adopts multiple fire pumps powered by electric motors. The general fire water supply environment is equipped with one electric and one diesel fire pump as the reserve water pump to ensure sufficient emergency water consumption. The main components of the electric motor fire pump group are the motor and the pump body. The subdivision of the pump body is the pump casing, the impeller, the pump shaft, the bearing, the coupling, the sealing form, the lifting pipe, etc. The specific fire pump model is determined according to the environment and performance requirements. According to the material quotation required by the customer, accurate selection is beneficial to on-site use and reduces failure problems.

Flow：50-7500 GPM
Head：3-20 Bar 40-300 psi
Power：11-1000 kw
Caliber：50-400 mm
Frequency：50 or 60 Hz

D-type horizontal, single-suction multi-stage, segmented centrifugal pump has the characteristics of high efficiency, wide performance range, safe and stable operation, low noise, long life, convenient installation and maintenance, etc. For conveying clean water or other liquids with physical and chemical properties similar to water. It can also be used to transport hot water, oil, corrosive or abrasive media by changing the material of the pump flow parts, the sealing form and increasing the cooling system

Electric fire pump has the characteristics of high efficiency and energy saving, low noise, high temperature resistance, low vibration and so on. The installation form is flexible and diverse, and the inspection is convenient.

A pipeline pump refers to a water pump that can be directly installed on a water pipeline, and can also be called a pipeline centrifugal pump. More space-saving compared to ground-mounted pumps. The pump is mainly used for industrial water transportation and urban water systems. The main advantage is that it can pressurize, long-distance, and efficiently transport pure water media without particles and debris. The pump has developed to a very rich specification. Model, different pump body materials can be selected in different transportation environments, and it is a very popular transportation equipment at present.

The OTS Double-Suction Split-case centrifugal Pump with High-Pressure Electric Motor is an exceptional firefighting equipment. This powerful combination delivers high flow rates and unmatched pumping efficiency, ensuring robust and continuous firefighting actions. Its compact design allows for quick deployment and rapid response, making it suitable for various settings. From rural wildfires to urban firefighting needs, this firefighting pump safeguards communities of all sizes, representing the pinnacle of safety and protection.

Fire pump system alarms notify operators of potential issues or malfunctions. Alarms are tested during routine inspections to ensure their functionality. Testing may include simulating alarm conditions to verify proper activation.

Vertical long axis pump is also called vertical long axis submerged sewage pump, which has the advantages of high efficiency and energy saving, convenient operation, low noise and easy maintenance. It can be used to transport clean water or sewage containing solid particles, such as iron filings, coal powder, sand, etc., and the transport temperature is lower than 80 ¡ãC.

Regular testing ensures that fire pumps are functional and ready in an emergency. Insurance providers mandate this to mitigate risk and ensure compliance with safety regulations, potentially affecting coverage and premiums.

A pipeline pump refers to a water pump that can be directly installed on a water pipeline, and can also be called a pipeline centrifugal pump. More space saving compared to ground mounted pumps. This pump is mainly used for industrial water transportation and urban water system. Model, different pump body materials can be selected in different transportation environments, and it is a very popular transportation equipment at present.

Compared with domestic water pumps and production water pumps, fire pumps should have higher performance requirements. Most single-stage fire pumps provided by fire water sources require fire pumps to be pressurized to meet the water pressure and water volume requirements during fire fighting. The failure of the water pump due to improper setting and maintenance will inevitably affect fire fighting and rescue, causing unnecessary losses.

The submersible axial-flow pump is a special type of submersible pump designed for handling large flow rates with relatively low head conditions. It has a wide range of applications, including agricultural irrigation, urban water supply and drainage, municipal flood control and emergency rescue, as well as various water conservancy projects.

The Vertical Inline pump is used for conveying liquids. It consists of an electric motor, pump body, impeller, and sealing device. The pump is suitable for conveying various liquids and can be selected based on specific process requirements and medium characteristics.

Vertical turbine pumps are mainly used to transport clean water and sewage containing certain solid particles, corrosive industrial wastewater and seawater. Widely used in raw water treatment plants, sewage treatment plants, metallurgical steel industry, power plants, mines, municipal engineering and farmland water conservancy projects.

IS0 series single-stage centrifugal pump is a single-stage single-suction centrifugal pump product developed and designed by China Bede Technology Co., Ltd. with reference to similar international products and modern fluid mechanics to meet the international standard SO9908 second-level energy efficiency standard. The product integrates the advantages of similar products at home and abroad and adopts excellent hydraulic model to design. Therefore, its excellent hydraulic performance and structural characteristics ensure that users can effectively reduce the pump operating cost in a variety of applications.

ISO end-suction pumps offer high efficiency, high flow capacities, and the ability to withstand high pressures. The suction inlet is designed to efficiently intake fluids, while the pump itself is constructed to be compact, making it suitable for installation and maintenance in limited spaces.They also provide multiple material options to accommodate different fluid mediums, including corrosive and high-temperature substances. ISO end-suction pumps find wide application in industries such as chemical, petroleum, pharmaceutical, food and beverage, and water treatment, where they are used for fluid transportation, circulation systems, heating, and cooling systems, among others. In conclusion, ISO end-suction pumps are reliable and efficient industrial pumps that meet global standards, making them suitable for various industries and applications.

These pumps are commonly used in municipal water systems, industrial facilities, power plants, and any location where a reliable water supply is necessary for firefighting. They are particularly useful where the water source is deep underground or where large volumes of water need to be moved vertically.

Installation requirements include a reliable power source, a dedicated water supply, appropriate piping, and compliance with local fire codes and standards such as NFPA 20.