What is a booster fire pump?

The housing of the diesel engine fire pump constitutes the working chamber of the pump. The impeller, shaft and rolling bearing are the rotors of the pump. Suspension bearing parts The supporting parts support the rotor parts of the pump, and the rolling bearings are subjected to the radial and axial forces of the pump. In order to balance the axial force of the diesel engine fire pump, most pumps have sealing rings at the front and rear of the impeller, and a balance hole on the back cover of the impeller. Because some pumps have little axial force, there is no seal on the back of the impeller. ring and balance hole. The axial sealing ring of the diesel engine fire pump is composed of packing gland, packing ring and packing to prevent air intake or large water leakage.

NL type sewage slurry pump is mainly used in rural areas to suck, convey and sprinkle river mud, manure, river water and slurry feed. , but also guaranteed for the simple flow of rural fire pumps.

The pump consists of these assemblies, that is the crooking assembly and the column pipe assembly below ground and the drive device above ground.

The fire control cabinet is mainly used to control the important executive device of the fire pump. The fire hydrant pump control cabinet and the fire sprinkler control cabinet are collectively called the fire control cabinet. When the fire hydrant pump (spray pump) control cabinet receives the fire hydrant signal, it will press Indicates to start or stop the fire water pump.

The fire pump refers to a clean water pump used for fire water supply, and a single pump that handles medium temperature below 80 degrees and is not corrosive. The pump set is the joint operation of multiple fire pumps to ensure the quantity and stability of the water supply. The electric motor fire pump group adopts multiple fire pumps powered by electric motors. The general fire water supply environment is equipped with one electric and one diesel fire pump as the reserve water pump to ensure sufficient emergency water consumption. The main components of the electric motor fire pump group are the motor and the pump body. The subdivision of the pump body is the pump casing, impeller, pump shaft, bearing, coupling, sealing form, water lift pipe, etc. The specific fire pump model is determined according to the environment and performance requirements, and at the same time According to the material quotation required by the customer, accurate selection is beneficial to on-site use and reduces failure problems.

Starting mode
* Direct online <15kw * Y-△ voltage reduction startup 15kw~75kw (don’t adapt to submersible sewage pump control equipment) * Self-coupling voltage reduction startup >15kw (adapt to submersible sewage pump)
* Soft starter startup >15kw
Control mode
Y — automatically control the start and stop of the pump according to the height of the liquid
P — automatically controls the start and stop of the pump according to the pressure. Used in life and fire water supply and drainage pressurization system
T — Control the start and stop of the pump according to the set-up temperature. Used for constant temperature and heat exchange system

Suitable for use with clean water. For Fire hydrant water supply, sprinkler system, fire system voltage regulator.

PHYM100/20、PHYM100/30、PHYM100/40、PHYM100/50、PHYM100/60、
PHYM100/70、PHYM100/80、PHYM100/90、PHYM100/100

Reliable because of professionalism, specializing in the production of industrial fire pumps for 20 years, to provide you with the best quality and most intimate service.
if you are interested in our pumps, welcome to contact us!

WQ (QW、WQK ) series submersible sewage pump applicable to transport containing solids and fiber of sewage or clean water.

The pump’s performance range: flow 130-9000m3/h, head 3.5-22m. Simple structure, reliable use, easy
installation, high efficiency, small body, light weight.

The equipment from Better Technology Group is debugging now

The remote monitoring system for the water supply pump station is suitable for the remote monitoring and management of the pressurized pump station in the urban water supply system.
The pump station manager can remotely monitor the water level of the pump station pool or the entry pressure, the working status of the booster pump group, the outbound flow, and the exit pressure from the monitoring center; they can remotely control and automatically control the start and stop of the booster pump group; When optical fiber communication is used, the panorama and important stations in the station can be monitored by image, so that the pump station can be unattended.

Vertical turbine pumps are commonly used in municipal water supply systems, agricultural irrigation systems, industrial water supply and wastewater treatment systems, and in mining and oil extraction operations.

XBD-S fire pump is a horizontal split structure type. The suction port and the discharge port are below the axis of the pump, and the horizontal direction is perpendicular to the axis. The pump of this structure type does not need to disassemble the inlet and outlet pipes during maintenance. Installation and maintenance is very convenient. The rotor as a whole
The combined parts can be hoisted as a whole for easy maintenance, and the same rotor part can be used for reverse rotation. The bearings at both ends are made of high-precision imported deep groove ball bearings, which have smooth operation, low noise and long service life.
Shaft seals are available in two types: mechanical seals or packing seals, and users can choose by themselves.

Fuel tank specifications：200L/400L/600L/800L/1000L/1200L/1500L/1800L/2100L/2500L/3100L/3600L/4100L/4500L

Hygienic and clean to use, high efficiency, low noise, mild corrosion resistance and compact structure, beautiful appearance, small size, light weight, convenient use and maintenance, reliable sealing performance

These photos show some of the motors used in exhibitions. Our company’s ordinary motor products include Low voltage motor, Low-voltage variable frequency speed control motor, Compact low voltage high power motor, High voltage motor, High voltage motor, High voltage compact motor, Low-voltage flameproof motor, Low-voltage flameproof type variable frequency speed regulating motor, Low-pressure dust explosion-proof motor.

Filter is an indispensable device on the transmission medium pipeline, usually installed in the pressure reducing valve, pressure relief valve, fixed water level valve, square filter other equipment import end equipment.

Fuel tank specifications：200L/400L/600L/800L/1000L/1200L/1500L/1800L/2100L/2500L/3100L/3600L/4100L/4500L

Fuel tank specifications：200L/400L/600L/800L/1000L/1200L/1500L/1800L/2100L/2500L/3100L/3600L/4100L/4500L

Our highly acclaimed Box-type Non-Negative Pressure Water Supply Equipment is the savior for your hotels, hospitals, schools, and more! Not only does it provide stable water flow and pressure, but it also guarantees fresh water quality! Suitable for life water supply systems in high-rise buildings, residential communities, and large-scale architectural complexes, bid farewell to water shortage worries! The Box-type Non-Negative Pressure Water Supply Equipment features an advanced automatic control system that instantly starts the water pump when demand increases, providing you with a continuous and stable water flow. And when demand decreases, the pump intelligently stops, avoiding energy waste! The compact box-type structure makes installation and maintenance a breeze! Whether it’s solving water supply issues in low-pressure areas or addressing the needs of places like hotels, hospitals, and schools where water cannot be shut off but face insufficient tap water pressure, our Box-type Non-Negative Pressure Water Supply Equipment offers the perfect solution!

The variable frequency air pressure water supply equipment is a kind of water supply equipment. It uses the pressure change of the compressed air in the closed tank to adjust and pressurize the water supply. It mainly plays the role of boosting and water volume adjustment in the water supply system. Frequency conversion air pressure water supply equipment. It is a common pressurized and stabilized equipment, including air pressure water tanks, jockey pumps and some accessories.

The device operates by drawing foam concentrate from a storage tank and blending it with water at a set ratio, often using a venturi or a balanced pressure system. The mixed solution is then pressurized and delivered through fire hoses, nozzles, or sprinkler systems to the fire scene.

The air conditioning pump is a pump designed for sewage. The air-conditioning pump is suitable for the drainage of the polluted condensate with a large specific gravity, and can be used for the drainage of high-temperature and weakly acidic condensate (temperature -46~95℃), and can be used in air-conditioning systems and refrigeration equipment.

The star connection-delta connection utilizes the two connection methods of the motor to achieve the purpose of step-down starting, reduce the starting current, and reduce the impact of excessive current on the power grid. Simply put, the stator is connected in star at the start of the motor and then switched to delta connection after starting, which is the starting method of star-delta buck start.

Self priming pump diesel engine driven works for water or medium similar to water that viscosity below 5°E and temperature below 80°C(176°F). It is compact, easy to operate, running stable, easy to maintain, efficient, with long service life and large suction capacity.

Hollow shaft Motor for vertical turbine pump, which use for vertical turbine pump

The submersible sewage pump has features such as easy installation and maintenance, high working efficiency, anti-clogging and anti-winding design, which make it an ideal choice for industrial, municipal or commercial waste discharge system, septic tank, piggery, farmland irrigation.