What is the gas driven fixed water supply equipment for fire protection?

XA bare pump with below Models for packing
XA100/26
XA80/26
XA65/32
XA50/32

Yes, vertical turbine pumps can be constructed from materials such as stainless steel or high-strength alloys to withstand corrosive fluids or abrasive particles. Additionally, various coating and lining options are available to further protect pump components from corrosion or wear.

Sewage pump is a kind of centrifugal impurity, there are two kinds of submersible and dry. It is mainly used for the treatment of industrial sewage and domestic sewage, and has played a great role in environmental protection. In addition, there are also cutting impellers in the sewage pump, which can play a good role in the treatment of various fibrous substances in the sewage.

Export fire pump set will be packaged with free fumigating wooden case.

IRG series vertical hot water pump are designed according to the unique structure of pipe centrifugal pump.These series pump adopt the advanced fluid model optimized by pump experts. So the pumps have high efficiency and reliability. Some units and components have exported to internal markets and gained good comments from both domestic and oversea clients.

The pump is optimized by domestic advanced hydraulic model. At the same time according to the use of temperature, medium and other different ISW based on the derivation of hot water pump, high temperature pump, chemical pump, oil pump, is the current national standard finalize the promotion of products. Horizontal pipeline oil pump

The gasoline engine water pump is a centrifugal pump composed of a water pump and a bracket. It has the advantages of low cost, light weight, convenient maintenance, low manufacturing cost and low noise.

YCB series multistage centrifugal oil pump is used mainly for petroleum refining, petrochemical and chemical industries to transport the petroleum-containing no solid grains, liquefied petroleum gas, other petroleum products, high-temperature high pressure, combustible and explosive liquids.This horizontal oil pump is an electric pump with explosion-proof device, which can be customized.

1.Enterprise unit waste water discharge.
2.Urban sewage treatment plant discharge system.
3.Hospital, hotel, high-rise building sewage discharge.

The sewage lifting device is a system composed of a sewage pump, a water collecting tank, a control device, and related pipe fittings and valves, which is used to lift and transport waste water below the sewers or away from the municipal pipe network. It can effectively solve or avoid the problems existing in the traditional sump.

Non-negative pressure frequency conversion water supply equipment is a new type of water supply equipment developed on the basis of frequency conversion constant pressure water supply equipment.

Volume:500-2000L

Hollow shaft Motor for vertical turbine pump, which use for vertical turbine pump

For end suction pumps and since water is entering one side of the impeller, and due to the design of “Impeller overhung”, these pumps cannot be used for large water flow applications and usually not exceeding 1500 gpm of flow.

The star connection-delta connection utilizes the two connection methods of the motor to achieve the purpose of step-down starting, reduce the starting current, and reduce the impact of excessive current on the power grid. Simply put, the stator is connected in star at the start of the motor and then switched to delta connection after starting, which is the starting method of star-delta buck start.

High efficiency, flat performance curve, wide operating range, in line with the relevant regulations of the fire department, and can meet the needs of different users
Adopt segmented structure, stable operation, low noise, long service life, small footprint, easy installation and maintenance

The fire control cabinet is widely used in many high-rise buildings, shopping malls, schools and other crowded places. This equipment enables the fire pump to cut off the circuit or alarm through the components in the fire control cabinet when it fails, and play a warning and The role of protection.

1. The pump is a vertical structure, the inlet and outlet diameters are the same, and they are located on the same center line. It can be installed in the pipeline like a valve. The appearance is compact and beautiful, the floor space is small, and the construction investment is low. Can be used outdoors.
2. The impeller is directly installed on the elongated shaft of the motor, the axial dimension is short, the structure is compact, and the pump and motor bearings are reasonably arranged, which can effectively balance the radial and axial loads generated by the operation of the pump, thereby ensuring the smooth operation of the pump. Low vibration and low noise.
3. The shaft seal adopts mechanical seal or mechanical seal combination, adopts imported titanium alloy sealing ring, medium-sized high temperature resistant mechanical seal and hard alloy material, wear-resistant seal, which can effectively prolong the service life of mechanical seal.
4. Easy installation and maintenance, no need to dismantle the pipeline system, just remove the pump joint seat nut to extract all the rotor parts.
5. The series and parallel operation modes of pumps can be adopted according to the requirements of use, that is, the needs of flow and head.
6. The vertical and horizontal installation of the pump can be adopted according to the requirements of the pipeline arrangement.

Hygienic and clean to use, high efficiency, low noise, mild corrosion resistance and compact structure, beautiful appearance, small size, light weight, convenient use and maintenance, reliable sealing performance

NL type sewage slurry pump is mainly used in rural areas to suck, convey and sprinkle river mud, manure, river water and slurry feed. , but also guaranteed for the simple flow of rural fire pumps.

The box-type integrated pump station is composed of stainless steel water tank, special water pump, intelligent frequency conversion control cabinet, non-negative pressure device, booster device, water diversion device and pressure stabilizer tank. The electromechanical integrated water supply equipment meets the requirements of the urban water supply pipe network, which does not generate negative pressure when pumping water, but also has a certain ability to adjust and store water, and the water is continuously cut off during peak periods.

The SXBWP Non-Negative Pressure Frequency-conversion Water Supply Equipment offers a comprehensive solution for addressing low water pressure challenges in various settings. Designed to cater to areas with inadequate municipal water pressure, as well as residential complexes, office buildings, hotels, schools, and industrial enterprises, this equipment ensures a stable secondary pressurized water supply. With features such as non-negative pressure generation, water and energy conservation, prevention of secondary pollution, and convenient installation, the SXBWP equipment delivers reliable water pressure enhancement while promoting efficient water usage and minimizing environmental impact.

As the name implies, the fire pump is divided into different types according to different classification methods. It has the characteristics of full sealing, no leakage and corrosion resistance. It is widely used in environmental protection, water treatment, fire protection and other departments to pump various liquids. , It is an ideal pump for creating a leak-free, pollution-free civilized workshop and civilized factory. The pump type is similar to that of the fire protection system, but the lift and flow are different.

Specification: PHYM100/20、PHYM100/30、PHYM100/40、PHYM100/50、PHYM100/60、PHYM100/70、PHYM100/80、PHYM100/90、PHYM100/100

The fire water supply pressure booster pump complete sets of equipment is the equipment for the firefighting project. The main function is to maintain the firefighting pressure of the fire extinguishing pipe network. When a fire alarm is opened, the fire extinguishing equipment can immediately spray the solid water column, and the alarm linkage starts the large fire pump. Win the initial fire extinguishing time of more than 30 seconds until the full load of the fire main pump is started. Because the equipment can maintain the pressure of the pipe network at all times, the pipe network does not have air to start. The fire pump does not slam, the pipe network has no risk of vibration.

The device operates by drawing foam concentrate from a storage tank and blending it with water at a set ratio, often using a venturi or a balanced pressure system. The mixed solution is then pressurized and delivered through fire hoses, nozzles, or sprinkler systems to the fire scene.

The portable fire pump is well know for its simple structure, light weight, compact structure and high efficiency.

Fuel tank specifications：200L/400L/600L/800L/1000L/1200L/1500L/1800L/2100L/2500L/3100L/3600L/4100L/4500L

The remote monitoring system for the water supply pump station is suitable for the remote monitoring and management of the pressurized pump station in the urban water supply system.
The pump station manager can remotely monitor the water level of the pump station pool or the entry pressure, the working status of the booster pump group, the outbound flow, and the exit pressure from the monitoring center; they can remotely control and automatically control the start and stop of the booster pump group; When optical fiber communication is used, the panorama and important stations in the station can be monitored by image, so that the pump station can be unattended.

Magnetic steel generally refers to aluminum nickel cobalt alloy (magnetic steel in English AlNiCo is the abbreviation of aluminum nickel cobalt), magnetic steel is made of several hard strong metals, such as iron, aluminum, nickel, cobalt and other synthesis, sometimes copper, niobium, tantalum synthesis, used to make super hard permanent magnet alloy.