What role do jockey pumps play in maintaining system pressure in large-scale facilities?

The air conditioning circulation pump, also known as a chilled water pump, is a vital component of air conditioning systems used for circulating refrigerant or chilled water. It plays a crucial role in heat exchange and temperature regulation. The pump consists of an electric motor, pump body, impeller, sealing device, and control system.

UL Flow：100-2500 GPM
UL Head：90-250 PSI

Flow：250-10000 GPM
Head：30-200 m / 3-20 Bar / 40-290 psi

If an electric fire pump fails during an emergency, the following steps should be taken:

Activate the backup pump: If available, switch to a secondary pump or manual firefighting methods.
Investigate the cause of failure: After the emergency, perform a thorough inspection to determine the cause of the failure.
Repair or replace the pump: Address the identified issues and restore the pump to full operational status.
Review maintenance practices: Ensure regular testing and maintenance procedures are followed to prevent future failures.

A Vertical Turbine Fire Pump serves a crucial role in fire protection systems, especially in large commercial and industrial buildings, as well as facilities with high-rise structures. Its purpose is to provide a reliable source of water at adequate pressure and flow rate to fire sprinkler systems, hydrants, and other fire suppression equipment in the event of a fire emergency. Here are the main purposes of a Vertical Turbine Fire Pump:

The lifespan of a fire pump depends on factors such as usage, maintenance, and environmental conditions. With proper maintenance and regular testing, fire pumps can have a service life of 20 years or more. However, individual components may need replacement during this period.

The submersible axial-flow pump is a special type of submersible pump designed for handling large flow rates with relatively low head conditions. It has a wide range of applications, including agricultural irrigation, urban water supply and drainage, municipal flood control and emergency rescue, as well as various water conservancy projects.The main feature of the submersible axial flow pump lies in its innovative design, enabling efficient operation under high flow rate conditions. Compared to conventional submersible pumps, it operates at relatively lower head conditions, making it more suitable for transporting water over long distances with moderate elevation changes.

UL Flow:50-500GPM
UL Head:6-16 Bar / 90-230PSI

Flow：50-5000 GPM
Head：3-16 Bar / 40-232 psi
Power：11-1000 kw
Frequency：50 or 60 Hz

The structure of the booster and stabilizer pump includes the pump body, impeller, pump cover, mechanical seal and other components, and the pump and the motor are coaxial. The axial force of the pump is balanced by the impeller with a balance ring. The inlet and outlet of the pump are on the same horizontal axis, and the diameter and specification are the same. The pump is provided with a mounting base, which is easy to install and increases the stability of the pump operation.

The horizontal single-stage fire pump is a reliable and efficient fire protection solution. Designed with advanced technology, this pump offers powerful drainage capabilities and dependable performance, providing outstanding fire protection for buildings and industrial facilities. This article highlights the features and advantages of the horizontal single-stage fire pump, explaining why it is the ideal choice for your fire suppression system.

The Horizontal Multistage Pump is an exceptional engineering solution that offers high performance and reliability for fluid handling applications. With its unique multistage impeller design, it delivers efficient and incremental pressure boosting for high-pressure and high-flow scenarios. Whether used in water supply systems, industrial processes, irrigation, or building cooling, this pump ensures stable water pressure and flow. Its compact design allows for easy installation and maintenance, while its superior construction materials guarantee durability and long-term reliable operation. Choose the Horizontal Multistage Pump to achieve exceptional performance and success in your fluid handling projects.

Vertical turbine pump pacakge process
The vertical turbine pump is hot sale in Philippines makrket
It can save pump room area and use in port area
If any need can contact with us

These pumps are commonly used in municipal water systems, industrial facilities, power plants, and any location where a reliable water supply is necessary for firefighting. They are particularly useful where the water source is deep underground or where large volumes of water need to be moved vertically.

The Vertical Inline pump is used for conveying liquids. It consists of an electric motor, pump body, impeller, and sealing device. The pump is suitable for conveying various liquids and can be selected based on specific process requirements and medium characteristics.

ISO series centrifugal pump is a single-stage single-suction centrifugal pump developed by China Better Technology Co., Ltd. with reference to international similar products using modern fluid mechanics to meet the international standard ISO9908 secondary energy efficiency standard.

This product combines the strengths of similar products in China and abroad and is designed with excellent hydraulic models, therefore, its excellent hydraulic performance and structural features ensure that the user can effectively reduce the operating cost of the pump in various applications.

The reasonable use and serious maintenance of the fire pump is the most important prerequisite for ensuring the normal and reliable operation of the pump, giving full play to the emergency function and prolonging the service life. In order to make the pump operator familiar with its structural characteristics, grasp the use and maintenance methods, and make good use of the pump, we have prepared this manual for the operator reference.

The Horizontal Multistage Pump is an exceptional engineering solution that offers high performance and reliability for fluid handling applications. With its unique multistage impeller design, it delivers efficient and incremental pressure boosting for high-pressure and high-flow scenarios. Whether used in water supply systems, industrial processes, irrigation, or building cooling, this pump ensures stable water pressure and flow.

The electric diaphragm pump is a reliable and efficient industrial pump powered by an electric motor. It uses diaphragms to move liquids, making it suitable for handling various fluids, including clear water, chemicals, corrosive liquids, viscous substances, and particle suspensions.

vertical turbine pump package
500gpm 8bar electric vertical turbine pump

Before start:

Turning the clutch by hand, there should be no jammedphenomenon at the turner position.
Opening the inlet valve and the vent valve, letting the waterfill into the pump’s chamber, then closing the vent valve.
Clicking the switch of motor, and confirming whether theturning is right or not.

Running:

Fully opening the inlet valves, and closing the valves of theoutlet pipe.
Connecting the power, Opening the valves of the outlet pipeand adjusting the needed working point when the turning velocityis normal.
Watching whether there exist abnormities or not, if yes,should the pump be stopped and inspected before re-running.

Stop:

After turning off the outlet valves one by one, shutting offthe power.
Shutting off the inlet valves.
If the ambient temperature is below 0 , some warm-℃keeping measures should be adopted.

The air conditioning circulation pump, also known as a chilled water pump, is a vital component of air conditioning systems used for circulating refrigerant or chilled water. It plays a crucial role in heat exchange and temperature regulation. The pump consists of an electric motor, pump body, impeller, sealing device, and control system.

Flow：50-7500 GPM
Head：3-20 Bar
The long shaft pump is a high-performance engineering pump known for its unique long shaft design and exceptional capabilities. It offers advantages such as suitability for deep-buried pump stations, improved transmission efficiency, and reduced energy consumption. With excellent corrosion resistance and reliability, it can handle various fluids in diverse environments. It is a reliable solution for water supply, sewage treatment, and chemical processes.

The Vertical Single stage fire pump is specifically designed for fixed fire protection systems in a wide range of settings, including businesses, construction projects, and high-rise buildings. It is a vital component in fire hydrant extinguishing systems, automatic sprinkler fire suppression systems, and more.

Middle open pump (middle open cycle), also known as single-stage double suction centrifugal pump, is mainly characterized by large flow of conveying medium.

Operating principle of the split pump: the impeller is installed in the pump shell and fastened on the pump shaft, which is directly driven by the motor. The center of the pump housing is connected with a liquid suction pipe. The liquid enters the pump through the bottom valve and the suction pipe. The liquid discharge port on the pump casing is connected with the discharge pipe. When the speed of the pump is constant, its head and flow are related to the impeller diameter.

XBD electric fire pumps are mainly used for the fixed fire hydrant fire system; automatic spraying fire system used by all sorts of organs, projects, high-floor buildings etc. and can be transferred with the clear water without solid grain under 100 or its equivalence, also be used for public-used water providing system for fire, living, production, construction and municipality.

The oil pump is a light and compact pump, and there are three categories of in-line, distribution and single. The oil pump needs a power source to run, and the lower camshaft is driven by the engine crankshaft gear.

Smooth operation: The absolute concentricity of the pump shaft and the excellent dynamic and static balance of the impeller ensure smooth operation without vibration.
No water leakage: Carbide seals of different materials ensure no leakage when conveying different media.
Low noise: The water pump supported by two low-noise bearings runs smoothly and is basically silent except for the faint sound of the motor.
Low failure rate: The structure is simple and reasonable, and the key parts are matched with international first-class quality, and the trouble-free working time of the whole machine is greatly improved.
Easy maintenance: replacement of seals, bearings, simple and convenient.
Less space occupation: horizontal single-stage centrifugal pump is horizontal suction, vertical discharge, vertical single-stage centrifugal pump is the outlet can be left and right two directions, easy to arrange and install the pipeline, saving space.

The vertical turbine pump is a vertical pump composed of single or multiple centrifugal or mixed-flow impellers, guide casing, riser pipe, transmission shaft, pump base, motor and other components. The pump base and the motor are located on the upper part of the wellhead (or pool), and the power of the motor is transmitted to the impeller shaft through the transmission shaft concentric with the water pipe, driving the impeller to generate flow and lift.

When choosing an electric fire pump, consider the following factors:

The required water flow rate and pressure.
The availability and reliability of the power supply.
Compliance with local fire codes and standards.
The reputation and reliability of the manufacturer.
The availability of service and support.

Flow：500 GPM
Head：9 bar
ISO end-suction pumps find wide application in industries such as chemical, petroleum, pharmaceutical, food and beverage, and water treatment, where they are used for fluid transportation, circulation systems, heating, and cooling systems, among others.

XBD series electric fuel centrifugal fire pump is a new type of medium and low pressure fire protection product developed by our company according to my country’s latest fire pump standard (GB 6425-1998). Its motor and fire pump are directly connected, which simplifies the intermediate transmission structure and enhances the running stability. Its construction area is 30% less than that of ordinary horizontal fire pumps, and the shaft seal is made of hard alloy mechanical seal without leakage. XBD series includes vertical single-stage fire pump, vertical multi-stage fire pump, horizontal single-stage fire pump, horizontal multi-stage fire pump four structural types to meet the different requirements of users.