XA End Suction Pump: Your Industrial Fluid Partner

Environmental considerations include:

Energy efficiency: Using efficient motors and VFDs to reduce energy consumption.
Noise levels: Installing pumps in noise-sensitive areas may require sound-dampening measures.
Water conservation: Ensuring the system is designed to use water efficiently and avoid unnecessary wastage.
Emissions: Unlike diesel pumps, electric pumps do not produce exhaust emissions, making them more environmentally friendly.

Site conditions
YE3 series motors air suitable for almost all applications and operate satisfactorily at temperatures from -20 to +40 and
altitudes up to 1000 meters above sea level.
Temperature and insulation
The Motors’ insulation system are designed by Class F(155 ), operated with Class B(80K). Which incerase the motor useful
life and reliability.
Cooling and ventilation
The standard cooling method is totally Enclosed Fan Cooled(TEFC) in accordance with IC411 of IEC60034-6. Standard
motors are equipped with radialflow plastic fans.
Protection class
The standard degrees of protection is IP55.The IP55 enclosure means complete hoseproof and dustproof protection. A
higher degrees of protection is available.
Motor protection
Motors can be installed with PTC, PT100, such as winding and bearing temperature measurement as well as other kinds of
protection on request

The XBD-L Vertical Single stage single suction fire pump is specifically designed for fixed fire protection systems in a wide range of settings, including businesses, construction projects, and high-rise buildings. It is a vital component in fire hydrant extinguishing systems, automatic sprinkler fire suppression systems, and more. This pump is capable of delivering clear water and water-like media with physical and chemical properties similar to water, without solid particles, at temperatures below 100°C. It is also suitable for fire protection, domestic water supply, shared water supply systems, as well as building and municipal water supply and drainage applications.

The mud pump is mainly used to transport the mud medium with high consistency or more particles and debris. It is often used in construction sites, enterprise production, and mud pond pumping.

The vertical turbine pump is a vertical pump composed of single or multiple centrifugal or mixed-flow impellers, guide casing, riser pipe, transmission shaft, pump base, motor and other components. The pump base and the motor are located on the upper part of the wellhead (or pool), and the power of the motor is transmitted to the impeller shaft through the transmission shaft concentric with the water pipe, driving the impeller to generate flow and lift.

Flow：500 GPM
Head：9 bar
ISO end-suction pumps find wide application in industries such as chemical, petroleum, pharmaceutical, food and beverage, and water treatment, where they are used for fluid transportation, circulation systems, heating, and cooling systems, among others.

Key installation requirements include:

A stable and reliable power source, often with a backup generator.
Proper sizing based on the building’s fire protection needs.
Adequate ventilation and cooling in the pump room to prevent overheating.
Installation of controllers and alarms to monitor pump status.
Compliance with local fire codes and standards such as NFPA 20.

The XA single-stage centrifugal pump is a widely used industrial pump designed for fluid transportation and handling in various industries. It features a simple and compact design with a rotating impeller and a stationary pump casing. The pump offers high efficiency, reliability, and flexibility in installation. It finds applications in water treatment, agriculture, construction, petrochemicals, energy, pharmaceuticals, and food processing. The XA pump is capable of handling different fluid mediums and provides efficient flow control. Its operating principle utilizes centrifugal force to draw in and propel fluids through the pump. Overall, the XA single-stage centrifugal pump is a reliable and efficient solution for fluid pumping needs in industrial settings.

The air conditioning circulation pump, also known as a chilled water pump, is a vital component of air conditioning systems used for circulating refrigerant or chilled water. It plays a crucial role in heat exchange and temperature regulation. The pump consists of an electric motor, pump body, impeller, sealing device, and control system.

Flow：50-7500 GPM
Head：3-20 Bar
The long shaft pump is a high-performance engineering pump known for its unique long shaft design and exceptional capabilities. It offers advantages such as suitability for deep-buried pump stations, improved transmission efficiency, and reduced energy consumption. With excellent corrosion resistance and reliability, it can handle various fluids in diverse environments. It is a reliable solution for water supply, sewage treatment, and chemical processes.

Flow：50-7500 GPM
Head：3-20 Bar
Vertical Turbine Fire Pumps play a versatile role in various applications. They are essential in water management, agriculture for irrigation, and industrial processes dealing with different liquids. These pumps excel in emergency fire response, ensuring a swift and reliable water supply. Crucial for urban water systems, they meet the constant demand for clean water.

While primarily designed for firefighting, some facilities may use electric fire pumps for other high-pressure water needs, but this should be done in accordance with local regulations and without compromising fire safety.

Multistage fire pumps have two or more impellers, each enclosed in its own volute, usually part of a common body. For two-stage pumps, the transfer valve is located at the outlet of the first stage volute. Depending on the desired pump performance, it will direct the water to either the pump discharge (parallel) position or the second stage inlet pressure (in series).

XBD series fire pump set is a new type of fire pump developed by our company according to the actual needs of the market for fire booster (stabilized) pumps and its special requirements for special use, and in strict accordance with the latest national GB6245-2006 “fire pump” standard. product. Tested by the National Fire Equipment Quality Supervision and Testing Center, all performance indicators meet or exceed the standard requirements, and have obtained the formal certification of the National Fire Equipment Testing Center.

ISO end-suction pumps offer high efficiency, high flow capacities, and the ability to withstand high pressures. The suction inlet is designed to efficiently intake fluids, while the pump itself is constructed to be compact, making it suitable for installation and maintenance in limited spaces.They also provide multiple material options to accommodate different fluid mediums, including corrosive and high-temperature substances. ISO end-suction pumps find wide application in industries such as chemical, petroleum, pharmaceutical, food and beverage, and water treatment, where they are used for fluid transportation, circulation systems, heating, and cooling systems, among others. In conclusion, ISO end-suction pumps are reliable and efficient industrial pumps that meet global standards, making them suitable for various industries and applications.

A split pump is a centrifugal pump with two single-suction impellers or a double-suction impeller supported between bearings. The housing is axially separated from opposing suction and discharge flanges. This facilitates maintenance of the pump. This robust and simple design is especially suitable for high flow applications.

The horizontal explosion-proof oil pump has a simple structure, convenient maintenance, can be fixed and installed without vibration, good sealing, low noise, convenient maintenance and low price. It can be used for garden sprinkler irrigation, high-rise building water supply and drainage, metallurgy, mining, food, chemical and fire protection systems and other industries to transport water, chemical media and other liquids.

An FDC is an external connection point that allows the fire department to supplement the water supply to the fire protection system using their hoses and equipment if needed.

Selection criteria include:

Required flow rate and pressure.
Depth and characteristics of the water source.
Type of installation (indoor or outdoor).
Compliance with relevant standards and regulations.
Environmental conditions and potential hazards.

ISW series horizontal centrifugal pump is a new generation of energy saving,environment friendly verticalcentrifugal pump researched and developed by our company,whichabsorbs advanced technology of similar products abroad and adoptsdomestic general performance parameters of centrifugal pumps.

WXZQseries fire pneumatic water supply equipment is composed of fire pressure stabilizing device, fire pump and electric control system. As a complete set of equipment, it can meet all technical specifications of automatic fire water supply. In addition, it can accept and process all kinds of fire signals, replace the fire control center, and send out all kinds of operation and fault alarm signals.

ISG series vertical single-stage single-suction centrifugal pump
is a new generation of energy saving, environment friendly vertical
centrifugal pump researched and developed by our company, which
absorbs advanced technology of similar products abroad and adopts
domestic general performance parameters of centrifugal pumps. In
addition, according to different operation temperatures and mediums,
we developed the hot-water pump(IRG), corrosion-resistant chemical
pump(IHG) and oil pump (YG) – . This pump enjoys excellent perfor
mance, good reliability, long operation life, reasonable construction
and nice appearance, which is outstanding in the industry

ISO end-suction pumps offer high efficiency, high flow capacities, and the ability to withstand high pressures. The suction inlet is designed to efficiently intake fluids, while the pump itself is constructed to be compact, making it suitable for installation and maintenance in limited spaces.They also provide multiple material options to accommodate different fluid mediums, including corrosive and high-temperature substances. ISO end-suction pumps find wide application in industries such as chemical, petroleum, pharmaceutical, food and beverage, and water treatment, where they are used for fluid transportation, circulation systems, heating, and cooling systems, among others. In conclusion, ISO end-suction pumps are reliable and efficient industrial pumps that meet global standards, making them suitable for various industries and applications.

The XBD 6.0-30G-L Vertical Single stage single suction fire pump is specifically designed for fixed fire protection systems in a wide range of settings, including businesses, construction projects, and high-rise buildings. It is a vital component in fire hydrant extinguishing systems, automatic sprinkler fire suppression systems, and more. This pump set is capable of delivering clear water and water-like media with physical and chemical properties similar to water, without solid particles, at temperatures below 100°C. It is also suitable for fire protection, domestic water supply, shared water supply systems, as well as building and municipal water supply and drainage applications.

Common issues include loss of power, inadequate water supply, and mechanical failures. Regular maintenance and prompt repair of identified issues can mitigate these problems.

The IS series single-stage centrifugal pump is a reliable and versatile solution for fluid transfer applications. Known for its simplicity and ease of use, this horizontal centrifugal pump is designed to efficiently transport clear water and fluids with similar properties. With a compact structure and convenient maintenance, the IS pump offers stable and low-noise operation, making it suitable for a wide range of industrial, agricultural, and municipal tasks. Whether it’s for industrial cooling systems, municipal water supply, agricultural irrigation, or firefighting applications, the IS single-stage centrifugal pump provides efficient and dependable liquid handling. Its durable construction and corrosion-resistant materials ensure long-lasting performance.

The horizontal fire pump has a single-suction multi-stage and segmented structure. Among the newly developed series of energy-saving products, its performance parameters including its technical indicators all meet the relevant international standards, so it has the largest The characteristic is that it is very efficient, and the noise is very low during operation. In addition, its corrosion resistance is also very good. In addition, its structure is very reasonable, so its service life is very long.

Pump flow:200≤Q≤5000GPM
Head:70＜H≤150m
Speed:1500-3550 rpm
Frequency50 Hz or 60 Hz

The horizontal pipeline pump is a horizontally arranged pumping device used for conveying liquids or gases. It consists of an electric motor, pump body, impeller, and sealing device. Compared to vertical pipeline pumps, the horizontal pipeline pump offers advantages such as a smaller space requirement, convenient maintenance, stable operation, and wide applicability. Its horizontal layout helps reduce axial and radial loads, thereby enhancing the pump’s stability and operational efficiency. The horizontal pipeline pump is suitable for conveying various liquids or gases and can be selected based on specific process requirements and medium characteristics. It is recommended to consult with professional engineers or pump suppliers when purchasing and using a horizontal pipeline pump to ensure the selection of suitable equipment.

Electric fire pumps are used in various water environments, not only to meet the general water supply but also to be a good helper for fire-fighting water. The electric fire pump is manufactured with good structure and workmanship. It has a wide range of performance, and is easy to use and operate for a long time. The electric fire pump is aimed at various fire water environments, so the selection should also be based on the actual demand environment, performance parameters, etc.