XBC-D Firefighting Pumps: Defending Lives and Property

Series OTS pumps are single stage,double suction with horizontally split casings .They are suitable pumping unsettled water, clean water ,non-drinkable or hydrocarbon at a temperature not exceeded 105C¡£
Series OTS pumps are available for capacities Of 68-18000m3/hr and heads of 70-200m.They are adoptable in water works irrigation and drainage pumping stations,fire fighting systems, marine applications as well as refinery industry,etc.

Self-priming fire pump is a mechatronics equipment researched and developed according to the provisions of my country’s fire regulations and the different requirements of various users. The product is innovative, advanced and practical. It simplifies the design of the pump room. The underground pump room can be changed to the ground, which is convenient for construction and saves investment; the outdoor pool can also be used to meet the requirements of use; the self-priming function can be used to make the fire pool deeper. To 3-6m, under the same effective volume, the land area occupied by the pool is much smaller than the original, which saves land, facilitates construction, reduces construction costs, and greatly saves investment; it can work under the condition of negative water level and meet the requirements in time. Fire protection requirements; the self-priming fire pump can discharge water in time to rescue and extinguish fires in time; it has a strict and reliable automatic circuit detection function, so that the unit is usually in a quasi-fire-fighting state.

Flow：50-7500 GPM
Head：3-20 Bar
Power：11-1000 kw
The XBC-JC Diesel Engine Vertical Turbine Fire Pump is a reliable and efficient hydraulic solution designed for extracting water from deep wells and hot springs. With its unique long shaft design and advanced technology, this pump delivers powerful pumping capacity and lift height, swiftly transporting large volumes of water to desired locations.

Not all buildings require fire pumps. Their necessity depends on various factors, including the building’s size, occupancy type, and the available municipal water supply pressure. Local building codes and regulations dictate when fire pumps are required.

The XBC-IS diesel engine fire pump with wheels excels in terms of mobility, which is a significant advantage. It is equipped with sturdy and durable wheels, allowing you to effortlessly move the fire pump to the desired location. Whether in urban or rural areas, it can adapt to various terrains and environmental conditions. This convenient mobility makes the XBC-IS diesel engine fire pump with wheels an ideal emergency firefighting equipment.

The biggest difference between a diesel engine fire pump and an electric water pump is that it has its own independent power supply system—the battery. Therefore, the start-up and operation of the diesel engine fire pump can be completely separated from the mains.

The diesel engine fire pump is usually used as a backup facility, and it will only start automatically when the electric water pump fails or the power is cut off when the fire signal comes. When equipped with an ultra-low pressure pump starting device, the matching electric pump control cabinet should also be equipped with an ultra-low pressure pump starting device, and the lower limit of pump starting should have a certain pressure difference. Of course, it is also possible to design a control system that is more suitable for customer needs according to customer requirements.

Experience efficient fluid transfer with the XBC-XA Diesel End Suction Pump. With its unique end suction design and powerful diesel engine, this pump offers reliable performance and exceptional pumping capacity. It is suitable for a wide range of applications, from industrial fluid transfer to fire protection systems. The XBC-XA Diesel End Suction Pump features automatic operation, advanced control systems, and automatic fault detection for added safety and convenience. Choose this versatile pump for reliable and efficient fluid transfer in various industries.

·UL Standard:
Flow：50-2000 GPM   
Head： 80-250 PSI 

·NON-UL  Standard:
Flow：50-5000GPM 
Head： 40-250 PSI 

Experience efficient fluid transfer with the XBC-XA Diesel End Suction Pump. With its unique end suction design and powerful diesel engine, this pump offers reliable performance and exceptional pumping capacity. It is suitable for a wide range of applications, from industrial fluid transfer to fire protection systems. The XBC-XA Diesel End Suction Pump features automatic operation, advanced control systems, and automatic fault detection for added safety and convenience. Choose this versatile pump for reliable and efficient fluid transfer in various industries.

The diesel engine fire pump has automatic, manual and fault self -test functions. It can monitor the working status of the entire process, restore the automatic restart function of failure to start, automatic pre -lubrication and preheating, making the device startup safer and more reliable. It has the functions of remote control, remote control, and on -site bus connection. The battery is a fully automatic floating charging (constant current, constant voltage, drip charging) mode, ensuring that the battery is in a standby state at any time. The diesel engine fire pump is easy to use. It is equipped with a remote instrument and instrument. It can be connected to the control center as needed to install and use it to maintain it.

The diesel engine fire pump set is researched and developed in strict accordance with the national standard GB6245-2006 “Fire Pump” and other standards, and at the same time it is developed according to market demand and use characteristics. When a fire breaks out in a building, the power supply system is faulty, and the electric fire pump cannot be put into operation, the diesel engine emergency fire pump will automatically be put into operation to ensure that the fire-fighting work is carried out normally and the safety of life and property is guaranteed.

Experience efficient fluid transfer with the XBC-XA Diesel End Suction Pump. With its unique end suction design and powerful diesel engine, this pump offers reliable performance and exceptional pumping capacity. It is suitable for a wide range of applications, from industrial fluid transfer to fire protection systems. The XBC-XA Diesel End Suction Pump features automatic operation, advanced control systems, and automatic fault detection for added safety and convenience. Choose this versatile pump for reliable and efficient fluid transfer in various industries.

Standard:
       UL    Flow：100-3000 GPM    Head： 90-250 PSI 
       NON-UL   Flow：100-10000GPM   Head： 40-250 PSI 

The XBC-ZWC Diesel Engine Self-priming Pump is a powerful and versatile solution for various water transfer applications. Designed with reliability and efficiency in mind, this self-priming pump is specifically engineered to handle water transfer tasks with ease. Whether you need to move water from one location to another, drain flooded areas, or supply water for irrigation, the XBC-ZWC Diesel Engine Self-priming Pump is your trusted companion.

XBD, XBC electric fire pump units and diesel engine fire pump units meet the national standards GB6245-1998 “Fire Pump Performance Requirements and Test Methods”, GB/T1147-1987 “General Technical Conditions for Internal Combustion Engines”. They can be equipped with ISG, IS, S, D and other pump types respectively, forming various structural types such as pipeline type, vertical multi-stage, horizontal single-stage cantilever type, horizontal split, horizontal multi-stage, etc., to be suitable for various working conditions Use under different conditions (different power, different speed, different materials, etc.).

XBD and XBC units are mainly suitable for fire protection engineering of steel, metallurgy, electric power, petroleum, chemical industry, construction, port and other operations, emergency water supply for blast furnace, continuous casting, converter and other accidents, power plant emergency water supply for power failure, nuclear reactor safety protection cooling water supply, And other water supply projects that require automatic control.

The pictures show standy pump which is a part of EDJ fire pump set. It’s diesel engine fire pump. The type of pump is horizontal centrifugal pump.

Diesel engine fire pump, as a fixed fire extinguishing equipment, has been widely used in fire diversion, especially in emergencies such as no power supply or abnormal power supply, other diesel engines can also be equipped as power engines according to the needs of users.??
Diesel engine fire pump is mainly composed of diesel engine, fire pump, coupling, fuel tank, radiator, battery pack, intelligent automatic control panel, etc. The company’s products are designed and optimized by computer. Shandong Hairui Zhonglian Fluid Technology Co., Ltd. has strong technical force, rich production experience and perfect testing methods to ensure the stability and reliability of product quality.

Flow：50-5000 GPM
Head：3-16 Bar
Power：11-1000 kw
Frequency：50 or 60 Hz
The Diesel Engine End Suction Fire Pump set is suitable for emergency firefighting scenarios, particularly ideal for high-rise water supply, building firefighting, central air conditioning water circulation, industrial process system circulation, cooling systems, boiler water supply, industrial water supply and drainage, water plant supply, irrigation in plantations, and more.

The biggest difference between diesel engine fire pump and electric water pump is that it has its own independent power supply system – battery. Therefore, the start and operation of diesel engine fire pump will not completely depend on city power.

The diesel engine fire pump is usually used as a backup facility, so it will only start automatically when the fire signal comes, and when the electric water pump fails or the power supply is cut off. When it has a device for starting the pump at ultra-low pressure, its matching electric water pump control cabinet should also have a device for starting the pump at ultra-low pressure, and the lower limit of the two pumps should have a certain pressure difference.

Flow：50-5000 GPM
Head：30-160 m 3-16 Bar 40-232 psi
Power：11-1000 kw
Frequency：50 or 60 Hz

Experience efficient fluid transfer with the XBC-XA Diesel Single stage centrifugal pump. With its unique design and powerful diesel engine, this pump offers reliable performance and exceptional pumping capacity. It is suitable for a wide range of applications, from industrial fluid transfer to fire protection systems.

-UL Standard:
Flow：100-3000 GPM   
Head： 90-250 PSI 
– NON-UL Standard:
 Flow：100-10000GPM   
Head： 40-250 PSI 

Flow：50-5000 GPM
Head：3-16 Bar
Power：11-1000 kw
Frequency：50 or 60 Hz
The Diesel Engine End Suction Fire Pump set is suitable for emergency firefighting scenarios, particularly ideal for high-rise water supply, building firefighting, central air conditioning water circulation, industrial process system circulation, cooling systems, boiler water supply, industrial water supply and drainage, water plant supply, irrigation in plantations, and more.

1. Diesel self-priming pump is suitable for urban environmental protection, construction, fire protection, chemical, pharmaceutical, dye, printing and dyeing, brewing, electric power, electroplating, papermaking, industrial and mining washing, equipment cooling, etc.
2. The diesel engine self-priming pump is equipped with a rocker-type sprinkler, which can also spray the water into the air and spray it into small raindrops. It is a good tool for farms, nurseries, orchards and vegetable gardens.
3. The diesel engine self-priming pump is suitable for clear water, sea water and chemical medium liquid with acidity and alkalinity and slurry with general paste (media viscosity <100 centipoise, solid content up to 30%). 4. The diesel engine self-priming pump can be used with any type and specification of filter press, and the most suitable pump type for pressure filtration when the slurry is sent to the filter press.

·UL Standard:
Flow：50-2000 GPM   
Head： 80-250 PSI 

·NON-UL  Standard:
Flow：50-5000GPM 
Head： 40-250 PSI 

There are many types of fire-fighting equipment. Fire hydrants and fire extinguishers are the most common types. The other is the fire pump, which is the heart of the fire-fighting system and plays an important role in pressurizing and supplying water to the fire-fighting system. Among the numerous fire pump products, fire pumps can be divided into multi-stage and single-stage fire pumps.

Factors to consider include the required flow rate and pressure, the power source available (gasoline, diesel, or electric), the distance from water source to fire hazard, the type of fire hazard (e.g., size of fire, type of fuel), and any local regulations or codes governing fire pump installations. Consulting with a qualified fire protection engineer or technician can help determine the most suitable pump for specific needs.

Whether you’re a building owner, factory manager, or ship operator, we understand your concern for fire safety. We take pride in introducing the XBC 10-65-IS fire pump, a highly efficient and reliable equipment that will provide exceptional fire protection.

The XBC 10-65-IS fire pump stands out with its outstanding performance and advanced technology. Whether dealing with emergency situations in buildings, factories, warehouses, or ports, it can reliably provide a stable water source. With a flow rate of 10 cubic meters per hour and a head of 65 meters, the XBC 10-65-IS fire pump can swiftly deliver a large volume of water to the fire scene, ensuring effective fire control.

The Diesel Engine Split Case Fire Pump finds wide application in various locations and buildings, including factories, commercial buildings, residential complexes, hospitals, airports, ports, and more. Whether serving as the primary firefighting water source or a backup water supply, it offers reliable support to your firefighting equipment and systems.

Diesel engine fire pump set is a new type of multi-functional fire fighting equipment developed by our company in strict accordance with the technical requirements of the national standard GB6245-2006 (fire pump) and the National Fire Protection Association NFPA20 (installation of centrifugal fire pumps). The product integrates industrial automation control technology, fluid machinery and machinery manufacturing.