XBD-OTS Electric Fire Pump Set

Flow: 25-100gpm
Rated pressure:H＜8bar
Speed: 2950-3550RPM

100gpm5bar ED fire pump ready to Africa

The fire pump is used to pump all kinds of liquids. It is an ideal pump and fire protection system for creating non-leakage, non-pollution civilized workshops and civilized factories. It is often installed on fire trucks, fixed fire extinguishing systems or other fire-fighting facilities for transportation Special pumps for liquid extinguishing agents such as water or foam solutions. Fire pumps are widely used in environmental protection, water treatment, fire protection and other departments.

The electric motor fire pump is an important water supply equipment in the fire protection system. The electric motor fire pump has a wide range of head, flow and power, and can be used in many environments. Providing sufficient water supply is the key to ensure emergency use.

A fire pump controller manages the operation of the fire pump, including starting, stopping, and monitoring performance. It ensures the pump operates correctly during an emergency and complies with NFPA 20 requirements.

The electric fire pump set is an important fire pump equipment, usually in a horizontal state. Each pump group is composed of five parts: front pump, electric motor, hydraulic coupling, main feed water pump, lubricating oil device (including lubricating oil cooler and working oil cooler. In normal state, two sets are running, one There are two standby pumps, and any feedwater pump set can be used as a standby pump. When one of the two running pumps stops due to an accident, the standby pump will be put into operation automatically.

Diesel engine fire pumps are mainly suitable for fire water supply and foam fire extinguishing systems in petrochemical, natural gas, power generation, cotton and linen textiles, warehouses, airports, docks, high-rise buildings and other industries. It can also be used in occasions such as water ships, offshore oil tankers and fire fighting ships. The unit adopts imported diesel engine and fire pump. It has the characteristics of quick start, reliable water diversion, reasonable power reserve, stable operation, high degree of “three modernizations”, wide range of pressure and flow, etc. It is an advanced and reliable fire-fighting equipment.

Fire pump kits include a combination of electric pumps, diesel engine driven and electric motor driven jockey pumps for use in fire suppression systems. The fire pump group has a large flow rate, plays an important role in fire, and maintains a long-term high-efficiency working state under the condition of continuous water resources. With good reliability, it is welcomed and accepted by customers all over the world.

The electric fire pump set is a fire pump powered by an electric motor, and generally consists of a set of fire pumps, electric motors, control cabinets and auxiliary devices. Because the electric motor fire pump set is composed of these parts, it forms a powerful fire protection and power effect, and provides a strong water source support for various fire hydrant systems and sprinkler systems in the building.

The EJ (Electric pump + Jockey pump) Dual Power Fire Pump System is an innovative and reliable fire protection solution. Combining an electric pump for robust water pressure and flow with a top-quality jockey pump for stable pressure maintenance, this system ensures efficient and timely water supply during fires. With advanced automation, remote monitoring, and energy-saving features, the EJ Dual Power Fire Pump System is a trusted choice for commercial, industrial, and residential applications.

This is a set of EDJ fire pump set, which consists of electric pump + diesel pump + jockey pump. The three pumps are automatically started and stopped. When the joceky pump detects that the electric pump cannot operate normally, the diesel engine pump will start automatically. Can also be used, the fire pump set is widely used in various emergency firefighting occasions.

·UL Standard
Flow：50-3000 GPM
Head： 5-20 Bar (72.5-290 psi)
Speed：740-2900 r/min
·Non-UL Standard
Flow：30-9000 GPM
Head： 3-20 Bar (40-300 psi)
Speed：740-2900 r/min

·UL Standard
Flow：50-3000 GPM
Head： 5-20 Bar (72.5-290 psi)
Speed：740-2900 r/min
·Non-UL Standard
Flow：30-9000 GPM
Head： 3-20 Bar (40-300 psi)
Speed：740-2900 r/min

·UL Standard
Flow：50-3000 GPM
Head： 5-20 Bar (72.5-290 psi)
Speed：740-2900 r/min
·Non-UL Standard
Flow：30-9000 GPM
Head： 3-20 Bar (40-300 psi)
Speed：740-2900 r/min

Yes, modern fire pumps typically come with safety shutoff features to prevent damage from overheating, low oil pressure (for diesel pumps), or running dry. These features are designed to protect the equipment and prolong its life, though in critical applications, it’s vital that shutoff mechanisms do not compromise firefighting capabilities.

Flow: 120~1500GPM
Head: H＜150m
Speed:2950-3550RPM

1. The performance of the fire pump should meet the flow and pressure requirements of the fire water supply system.
2. The power of the driver equipped with the fire pump should meet the requirements of the power required for operation at any point on the performance curve of the selected pump’s flow and lift.
3. When a motor-driven fire pump is used, a dry-installed fire pump with the motor should be selected.
4. The fire pump should be installed dry, and the pump should be placed outside the pool, and the submersible pump cannot be directly placed in the water for water absorption.

WXZQ series fire-fighting pneumatic water supply equipment consists of a fire-fighting voltage stabilizer, a fire-fighting pump and an electrical control system. As a complete set of equipment, it can meet all technical specifications for automation of fire water supply. In addition, it can accept and process various fire alarm signals, replace the fire control center, and issue various operation and fault alarm signals.

The diesel engine fire pump has automatic, manual and fault self-checking functions. It can monitor the working status of the whole process, restore the automatic restart function of failure startup, automatic pre-lubrication and preheating, make the equipment startup safer and more reliable, and has the advantages of convenient use, convenient installation and convenient maintenance.

1. Electric fire pump: various end suction pumps and split pumps.
2. jockey pump: vertical, small flow, higher lift than electric or diesel pumps.
3. Control panel: Automatically control the water pump with overload and overcurrent protection.
4. Accessories: suction pipe, discharge pipe with flange, battery, gate valve, check valve, flexible expansion joint, pressure switch, pressure gauge, base, etc

The multi-stage fire pump consists of two parts: the motor and the pump, and the motor and the pump are coaxial. The structure of the pump consists of pump body, impeller, pump cover, mechanical seal and so on. The inlet and outlet of the pump are on the same horizontal axis and have the same caliber specification, so the loading and unloading is very convenient, and the floor space is small. The pump is fitted with a base for easy installation and increased pump stability. It is used to transport clear water without solid particles, liquids with physical and chemical properties similar to water. It is mainly used for pressurized water delivery in fire protection system pipelines, and is also suitable for industrial and urban water supply and drainage.

Maintaining fire pumps and jockey pumps is essential for ensuring their reliable operation in an emergency. Best practices for maintenance include regular inspection and testing of the pumps, checking for leaks, corrosion, and wear on components, and ensuring that all electrical connections and control systems are functioning correctly. It is also important to perform routine flow tests to verify that the pumps can deliver the required water flow and pressure as specified by design standards and regulatory codes. Lubrication of moving parts, replacement of worn-out seals and gaskets, and calibration of pressure sensors and alarms should also be part of a comprehensive maintenance program. Additionally, keeping detailed records of all inspections, tests, and maintenance activities helps track the condition of the pumps over time and identify potential issues before they lead to failure. Regular training for personnel on the operation and maintenance of fire pumps further enhances system reliability and readiness.

UL Standard
Flow：50-3000 GPM
Head： 5-20 Bar (72.5-290 psi)
Speed：740-2900 r/min
Non-UL Standard
Flow：30-9000 GPM
Head： 3-20 Bar (40-300 psi)
Speed：740-2900 r/min

While firefighting pumps are specifically designed for extinguishing fires, they can sometimes be adapted for other applications, such as irrigation or water transfer, depending on the pump type and specifications.

The DJ Fire pump set is made of Diesel fire pump+Jockey pump.
Application Scope：Equipment for warehouses, docks, airports, petrochemical, power plants, liquefied gas, textiles, ships, oil tankers and other occasions of a fire service.

Fire pumps are used to pump all kinds of liquids. They are ideal pumps and fire-fighting systems for creating non-leakage, non-polluting civilized workshops and civilized factories. They are often installed on fire trucks, fixed fire-extinguishing systems or other fire-fighting facilities for transportation. Special pumps for liquid extinguishing agents such as water or foam solutions. Fire Pump
Widely used in environmental protection, water treatment, fire protection and other departments.

The equipment is a diesel engine fire pump with a flow rate of 500gpm and a pressure of 70m customized by a Nigerian customer. The pump is suitable for fire protection occasions such as warehouses, docks, airports, petrochemicals, power plants, liquefied gas, textiles, ships, oil tankers, etc.

EJ fire pump set is a fire water supply equipment composed of an electric pump and a jockey pump designed and manufactured by Better Technology Co., Ltd. according to the <> standard, and has obtained 3CF certification. There are many models of Better dual-power fire pumps, which can be customized according to needs.

Series OTS pumps are single stage,double suction with horizontally split casings .They are suitable pumping unsettled water, clean water ,non-drinkable or hydrocarbon at a temperature not exceeded 105C¡£
Series OTS pumps are available for capacities Of 68-18000m3/hr and heads of 70-200m.They are adoptable in water works irrigation and drainage pumping stations,fire fighting systems, marine applications as well as refinery industry,etc.

– Renewable Energy Integration: Utilizing renewable energy sources, such as solar or wind, to power fire pump systems.
– Real-Time Data Sharing with Smart Grid: Enabling real-time data sharing with smart grid infrastructure for enhanced fire protection.
– Automated Control and Optimization: Using smart grid technology for automated control and optimization of fire pump operations.
– Compliance with Renewable Energy Standards: Adhering to fire safety regulations and standards for smart grid and renewable energy systems.