ZX (P) type self-priming centrifugal pump

Suitable for use with clean water. For Fire hydrant water supply, sprinkler system, fire system voltage regulator.

The ZWX box-type non-negative pressure water supply equipment is a pressurized water system designed to address inadequate municipal water pressure in critical settings such as hospitals and hotels, where water cannot be shut off. It also serves as an ideal solution for meeting the domestic water needs of high-rise buildings and, specifically, fulfilling the water requirements of schools. This equipment ensures a continuous water supply, even during maintenance or emergency situations, effectively resolving the challenges posed by low water pressure. With its efficient pressurized water supply and advanced control technology, the ZWX equipment offers stable water pressure and flow rates, catering to the diverse demands of different settings.

Starting mode
* Direct online <15kw * Y-△ voltage reduction startup 15kw~75kw (don’t adapt to submersible sewage pump control equipment) * Self-coupling voltage reduction startup >15kw (adapt to submersible sewage pump)
* Soft starter startup >15kw
Control mode
Y — automatically control the start and stop of the pump according to the height of the liquid
P — automatically controls the start and stop of the pump according to the pressure. Used in life and fire water supply and drainage pressurization system
T — Control the start and stop of the pump according to the set-up temperature. Used for constant temperature and heat exchange system

Accuracy: Provides a precise mixture of foam concentrate and water.
Reliability: Consistent performance in various firefighting conditions.
Ease of Use: Simple to operate and maintain.
Compatibility: Works with different types of foam concentrates and water supplies.

The non-negative pressure variable frequency water supply equipment takes the municipal pipe network as the water source, and makes full use of the original pressure of the municipal pipe network to form a closed continuous relay pressurized water supply mode, with good energy saving effect and no secondary pollution of water quality. Development and extension of water supply equipment.

The air conditioning circulation pump, also known as a chilled water pump, is a vital component of air conditioning systems used for circulating refrigerant or chilled water. It plays a crucial role in heat exchange and temperature regulation. The pump consists of an electric motor, pump body, impeller, sealing device, and control system. It enables the circulation of the refrigerant or chilled water to absorb or release heat, thereby achieving the desired cooling effect and regulating indoor temperatures. Key features of air conditioning pumps include high efficiency, control and automation capabilities, and diverse options to suit different system requirements. The selection of an appropriate air conditioning pump should consider specific system needs, flow rates, head pressures, and mediums.

The SXBWP Non-Negative Pressure Frequency-conversion Water Supply Equipment offers a comprehensive solution for addressing low water pressure challenges in various settings. Designed to cater to areas with inadequate municipal water pressure, as well as residential complexes, office buildings, hotels, schools, and industrial enterprises, this equipment ensures a stable secondary pressurized water supply. With features such as non-negative pressure generation, water and energy conservation, prevention of secondary pollution, and convenient installation, the SXBWP equipment delivers reliable water pressure enhancement while promoting efficient water usage and minimizing environmental impact.

PHYM100/20、PHYM100/30、PHYM100/40、PHYM100/50、PHYM100/60、
PHYM100/70、PHYM100/80、PHYM100/90、PHYM100/100

The fire water supply pressure booster pump complete sets of equipment is the equipment for the firefighting project. The main function is to maintain the firefighting pressure of the fire extinguishing pipe network. When a fire alarm is opened, the fire extinguishing equipment can immediately spray the solid water column, and the alarm linkage starts the large fire pump. Win the initial fire extinguishing time of more than 30 seconds until the full load of the fire main pump is started. Because the equipment can maintain the pressure of the pipe network at all times, the pipe network does not have air to start. The fire pump does not slam, the pipe network has no risk of vibration.

Foam tank systems typically include the foam tank itself, foam concentrate, foam proportioning equipment, pumps, piping, and discharge devices such as foam nozzles or monitors.

IS end suction pump, export to Bangladesh. use for CHILLER PLANT EQUIPMENT

ISG series vertical single-stage single-suction centrifugal pump is a new generation of energy-saving and environmentally friendly vertical centrifugal pump developed by the company’s technical staff on the basis of absorbing the advanced technology of similar products at home and abroad, and using the performance parameters of domestic general centrifugal pumps. This series of pumps has excellent performance, high reliability, long life, reasonable structure and beautiful appearance, and has a leading level in the industry.

CDL type of stainless steel metal stamping forming vertical multistage centrifugal pump , with the use of health clean, high efficiency, low noise, resistance to mildly corrosive and compact structure, beautiful appearance, small size, light weight, the use of easy maintenance, and reliable sealing performance.

Significant energy saving, small footprint, easy installation and stable performance.
The jacket is made of 304 high-quality stainless steel, and the shaft seal is made of wear-resistant mechanical seal, which has no leakage and long service life.
The axial force is solved by hydraulic balance, so the operation is stable and the noise is low.

The company introduced high-performance water pumps produced by German advanced technology. By using the prototype impeller and this type of impeller and its cutting, the pump has a full and broad model spectrum and high use efficiency. Within the range of model spectrum performance, the pump can provide
A pump that properly meets the working point of any flow and head required by the user.
It adopts the best hydraulic model at home and abroad that can self-balance axial force and radial force, with stable performance, high efficiency, compact structure, low vibration, high pressure resistance of the pump body, and convenient installation and maintenance.

Vertical inline close coupled fire pumps are specifically designed for vertical mounting. The suction and discharge nozzles are located on the same centerline 180° apart. Vertical pumps significantly reduce required mounting space. They are easy to maintain.

ZX self priming pump diesel engine driven works for water or medium similar to water that viscosity below 5°E and temperature below 80°C(176°F). It is compact, easy to operate, running stable, easy to maintain, efficient, with long service life and large suction capacity.

Capacity:50-1000L
Type:
Single-Wall Fuel Tank
Double-Wall Fuel Tank

1.Enterprise unit waste water discharge.
2.Urban sewage treatment plant discharge system.
3.Hospital, hotel, high-rise building sewage discharge.

XZQ type intelligent automatic complete set of water supply equipment can be used for the old water supply and drainage pressure system reform, can cancel the water tower, high water tank and pressure tank. Industry needs constant pressure water supply system, oil field constant pressure oil transmission system.

The domestic water supply equipment system is equipped with storage tanks and other water storage facilities, which saves the floor area and reduces the construction load, thereby saving a large amount of civil engineering investment costs. The intelligent and automatic operation of the equipment does not require a special person to be on duty, which saves management costs, and there is no water quality treatment instrument, which eliminates the need for regular cleaning and disinfection; the loss of system dripping, leakage, and overflow is reduced.

These photos show some of our diesel engine in stock. We cooperate with many diesel engine manufacturers to meet the needs of customers for different diesel engine brands.

The fire pump refers to a clean water pump used for fire water supply, and a single pump that handles medium temperature below 80 degrees and is not corrosive. The pump set is the joint operation of multiple fire pumps to ensure the quantity and stability of the water supply. The electric motor fire pump group adopts multiple fire pumps powered by electric motors. The general fire water supply environment is equipped with one electric and one diesel fire pump as the reserve water pump to ensure sufficient emergency water consumption. The main components of the electric motor fire pump group are the motor and the pump body. The subdivision of the pump body is the pump casing, impeller, pump shaft, bearing, coupling, sealing form, water lift pipe, etc. The specific fire pump model is determined according to the environment and performance requirements, and at the same time According to the material quotation required by the customer, accurate selection is beneficial to on-site use and reduces failure problems.

The horizontal pipeline centrifugal pump is a new generation of energy-saving and environmentally friendly horizontal centrifugal pump developed by itself on the basis of absorbing the advanced technology of similar products at home and abroad. The pump has excellent performance, high reliability, long life, reasonable structure and beautiful appearance, and has the leading level in the industry.

The Fire Pressure Stabilization Equipment, coupled with the CDL Vertical Multistage Fire Pump, offers a comprehensive solution to elevate fire safety measures. This powerful combination ensures a consistent water pressure for effective fire suppression. By incorporating pressure stabilization technology, this system guarantees an uninterrupted fire water supply, efficient water distribution, and reliable operation of fire hydrants and sprinkler systems. With advanced infrastructure and the ability to maximize firefighting capabilities, this configuration significantly enhances overall fire safety standards. Investing in fire pressure stabilization equipment is a proactive step towards ensuring superior fire protection and providing peace of mind in critical situations.

The equipment through the back curved impeller will be liquid forward at the same time, the sludge in the oxidation tank to fully stir and mix, to improve the oxidation tank and other sewage treatment facilities water flow conditions, so that different water to obtain the sewage treatment process required by the flow rate, in order to prevent sludge settlement, improve the efficiency of sewage treatment.

End suction centrifugal water pump is an energy-saving pump designed by teamwork in the whole nation, it is improved on a basis on model BA, B and other single-stage water centrifugal pump.

Maintenance requirements for vertical turbine pumps typically include periodic inspection and lubrication of bearings, checking and adjusting impeller clearances, monitoring motor performance, and ensuring proper alignment of the pump and motor.

1500rpm,200kw, diesel engine generator, which can use for the diesel mobile pump.

Specification
1. Simple structure, reliable performance
2. Small size, light weight
3. Good corrosion resistance, low power consumption
Main features
1.Mechanical seal and packing seal
2.Types of stainless steel: 301, 304, 316L
Application
It is used for drainage of industry, agriculture and city and fire-fighting drainage.
Technology parameter
Flow Q (m3/h): 3.5-400
Head H (m): 3-125
Rotating speed N (r/min): 1450, 2900
Power P (kw): 0.55-90
Model explanation
IS/IR/IH 100 – 80 – 160 A
* IS — clear water centrifugal pump
* IR — heat water centrifugal pump
* IH —chemical centrifugal pump
100 — inlet caliber
80 — outlet caliber
160 — impeller diameter
A — first incision